Adjusted my headlights and fog lights last night, BIG difference, my headlights were almost two turns low, (it had gotten even worse after I lowered car) took a test drive and a second adjustment to get to my liking, but what a difference, low beams are usefull now!
to adjust, I took a large cardboard box (about as tall as hood)placed in front of headlight and measured from the headlight cover to box side about 25"
adjusters are under hood directly behind each headlight, slotted screw adjuster.
turn on low beams, garage lights off and with a narrow slotted (regular) screwdriver clockwise is up CC is down (no R or L adjustment avail. that I could find)
tips, mark a starting point line on the box where the lower part of beam cuts off (should be a distinct line/shadow) (I moved my beam almost an inch up)
mark your screw driver with a line on top of handle i.e.(Q) so you can measure total turns for other light and reference (both my lights started and ended level with each other
For fog lights, remove the plastic radiator cover (lift center pin with small screwdriver to release pins) note how it fits as you remove it,
under cover the back of fogs have a small phillips head screw adjusters on top, the adjuster are the reverse up / down as the headlights I think.
tip, leave cover off until you take a test drive for final adjustment (tape the hood prop rod down for test drive)
to adjust, I took a large cardboard box (about as tall as hood)placed in front of headlight and measured from the headlight cover to box side about 25"
adjusters are under hood directly behind each headlight, slotted screw adjuster.
turn on low beams, garage lights off and with a narrow slotted (regular) screwdriver clockwise is up CC is down (no R or L adjustment avail. that I could find)
tips, mark a starting point line on the box where the lower part of beam cuts off (should be a distinct line/shadow) (I moved my beam almost an inch up)
mark your screw driver with a line on top of handle i.e.(Q) so you can measure total turns for other light and reference (both my lights started and ended level with each other
For fog lights, remove the plastic radiator cover (lift center pin with small screwdriver to release pins) note how it fits as you remove it,
under cover the back of fogs have a small phillips head screw adjusters on top, the adjuster are the reverse up / down as the headlights I think.
tip, leave cover off until you take a test drive for final adjustment (tape the hood prop rod down for test drive)