Adjusting Headlights?

viperos

New Member

May 19, 2003

2,943

0

0

Bellevue, WA (yes, the land where every 16 year o

Jan 2, 2004

#1

• Jan 2, 2004

• #1

well, the other day, I noticed my headlights really weren't lighting up that much of the roadway... so, I figured it was time for some HID bulbs... so I got them... great bulbs, much brighter, but I still can't see that much, and my light is more off to the right than center...

-how can I adjust the display area of my headlights? is this even possible? (without buying new lenses... which I might just cave and get some cobra headlights anyway from a local junkyard or something...)

-tips/tricks anyone???

 

1

1fstgt

New Member

May 27, 2003

728

0

0

Jan 2, 2004

#2

• Jan 2, 2004

• #2

yes it is possible.

those little bolt/screw thingys that go into the back of your head light, turn those, one will adjust it up and down and one will adjust it side to side. you need a very very small socket. (i forget what size it is)

 

D

David R

New Member

Dec 21, 2002

256

0

0

Ohio

Jan 2, 2004

#3

• Jan 2, 2004

• #3

its like a 4 or 4.5 mm. I had to cut an allen wrench down and put it in the little socket for a handle.

 

viperos

New Member

May 19, 2003

2,943

0

0

Bellevue, WA (yes, the land where every 16 year o

Jan 2, 2004

#4

• Jan 2, 2004

• #4

k... sounds simple enough right? anyway... what would a pair of cobra lenses go for either new or a junkyard?

 

SN95StangMan

New Member

Jul 5, 2003

1,292

0

0

Lynwood, CA

Jan 3, 2004

#5

• Jan 3, 2004

• #5

viperos said:

k... sounds simple enough right? anyway... what would a pair of cobra lenses go for either new or a junkyard?

Click to expand...

I dont think you're gonna find a set of cobra headlamps at a junkyard. Mustang parts usually get picked up pretty fast. You can find a lot of good places to buy some headlamps on ebay. I got mine from www.50resto.com . Have fun installing them too.

 

viperos

New Member

May 19, 2003

2,943

0

0

Bellevue, WA (yes, the land where every 16 year o

Jan 4, 2004

#6

• Jan 4, 2004

• #6

is that a socket, allen, or torx for that adjuster thingy? and do you know of like a plane that I use to align them...? I mean, any other words of advice?

-or should I just give up and take it to the local Chevron?

 

D

David R

New Member

Dec 21, 2002

256

0

0

Ohio

Jan 4, 2004

#7

• Jan 4, 2004

• #7

I used a 4mm socket... the allen was just for a little handle. I installed new headlights and corners and they were aimed too low when I was done. So I put like 6" strips of black tape on the garage wall for a reference to where they were pointing and then adjusted and drove a few times until I got them adjusted to where I liked them.