• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Advanced Timing

  • Thread starter Thread starter jasonh_86
  • Start date Start date Jun 8, 2005

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Jun 8, 2005
#1
  • Jun 8, 2005
  • #1
I have the Steeda Timing Adjuster on my car and it's set forward 4 degrees up to 14. I was wondering if anyone could tell me if going to 15 would be worse on my motor or would help me out or not make a difference or what?.. Thanks in advance for your help
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 8, 2005
#2
  • Jun 8, 2005
  • #2
If you get detonation, then you have gone too far...
 

AdRock

Member
Nov 13, 2003
521
1
19
South Texas
Jun 8, 2005
#3
  • Jun 8, 2005
  • #3
Bump it up to 15 and drive around. If you hear any pinging at all then go back to 14.
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Jun 8, 2005
#4
  • Jun 8, 2005
  • #4
i know this is gonna sound stupid.. but how will i know it if it starts with the detonation? dumb question, but i'm just not used to that stuff.. and i run 93 octane gas from a Shell gas station, if that helps with any info..
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 8, 2005
#5
  • Jun 8, 2005
  • #5
You need to run the high octane when you are advancing the timing. You will hear the detonation, I assure you.
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Jun 8, 2005
#6
  • Jun 8, 2005
  • #6
I know.. the previous owner made sure i put 91 or higher in it unless i were to back the timing down.. but what will detonation do to my motor if it happens one day?
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 8, 2005
#7
  • Jun 8, 2005
  • #7
Detonation is the motor killer. If you hear it you should take corrective action asap. It can shatter pistons and other really bad things. I am not sure what technically is going on under detonation but a search should give you some answers...
 

AdRock

Member
Nov 13, 2003
521
1
19
South Texas
Jun 8, 2005
#8
  • Jun 8, 2005
  • #8
jasonh_86 said:
I know.. the previous owner made sure i put 91 or higher in it unless i were to back the timing down.. but what will detonation do to my motor if it happens one day?
Click to expand...


Some light detonation every once in a while can happen and it won't won't do and majordamage to the engine, it happens from time to time if you get bad gas or something. It can also happen when the air temp is very high and the air is thin. But a lot of it will kill the engine. You stand a good chance of burning a piston.

But as faras I'm concerned, any pinging is very bad. I have my T/A set at 15 and I make sure to run nothing but 93 oct in it.
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Jun 8, 2005
#9
  • Jun 8, 2005
  • #9
alright.. the guy told me that Steeda told him 15 is the highest you should turn it on the stock internals and everything.. he said 15 was basically the breaking point, and 16 was too far.. so that's why he always kept it at 14.. but i'm not sure if i wanna turn it up just one more degree with the risks of messing something up, i dont figure it'll give me any gains worth risking stuff like that
 

AdRock

Member
Nov 13, 2003
521
1
19
South Texas
Jun 8, 2005
#10
  • Jun 8, 2005
  • #10
Kilgore Trout said:
Detonation is the motor killer. If you hear it you should take corrective action asap. It can shatter pistons and other really bad things. I am not sure what technically is going on under detonation but a search should give you some answers...
Click to expand...

Detonation occurs when the air/fuel mixture fully burns BEFORE the piston gets to TDC. Basically, the explosion is already pushing down on the piston while it is still coming up. The engine doesn't like this. The ping noise is the piston banging around inside the cylinder.
 
V

VividDreams

New Member
Jan 2, 2005
200
0
0
Lebanon County, PA
Jun 9, 2005
#11
  • Jun 9, 2005
  • #11
to add to AdRock, parts can be broken because there are two forces taking place in the engine, 1. the A/F mix is exploding prematurly and pushing down on the piston which itself is being pushed up by the crank via the connecting rod and piston wrist pin
 
You must log in or register to reply here.

Similar threads

1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
203
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
2003-04 Mustang Cobra Brake Conversion
  • Cassiebaebae
  • Oct 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
258
1996 - 2004 SN95 Mustang -General/Talk- Oct 24, 2026
Bib36`
Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
704
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
M
2001 cobra ignition timing off
  • Mike3
  • Jul 13, 2026
  • SVT Tech Forum
Replies
9
Views
406
SVT Tech Forum Aug 2, 2026
Mike3
M
J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
382
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?