i need some advice guys!! i got a 3 guage mount on the A pillar and only have 1 guage for it. i have an air/fuel. i was thinking of getting an oil pressure and a water temp but then i kinda want a tranny temp. im in a delimma...
yes it does, however they tend to be a little inaccurate. alot of guys use aftermarket cause they are more reliable and you can see exactly what the pressure is, once you start doing some more mods (heads, cam, intake) i like to think of it as almost a necessity
for what its worth don't be afraid of a mechanical oil pressure gauge. they are super responsive and its the only thing i have ran for 3 years without a single leak. i would also get a mechanical water temp just cause i don't like having a sending units
Unless the A/F gauge is a WB, I'd consider putting it somewhere else and getting the trans temp gauge you want (I think it's a good one to have). Having flashing lights in your periphery [from a NB gauge] might be annoying anyhow.
You could put the A/F gauge in a single pod under the dash - it might be less distracting.
Or you could do a radio bezel and add another gauge (vacuum is kinda neat, especially if you're SD).
for what its worth don't be afraid of a mechanical oil pressure gauge. they are super responsive and its the only thing i have ran for 3 years without a single leak. i would also get a mechanical water temp just cause i don't like having a sending units
im def. getting the mechanical ones...i also thought of getting the gauge plate that goes in the front 2 air vents. i think it looks pretty cool and easy to be able to read