• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Advise me on a pressure washer

  • Thread starter Thread starter limp
  • Start date Start date May 3, 2022
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,466
2,899
173
Florida
May 3, 2022
#1
  • May 3, 2022
  • #1
My car is being held up by the HOT water pressure washer I am trying to rent... It was out, then came back broken and for the last two weeks it is " waiting for parts"
So, considering buying a cold pressure washer to clean the engine compartment of my car... Its not all that bad, but has heavy grease and oil caked on around the steering Rack and K member.....
How will a cold pressure washer do cleaning this??
No problem spraying some degreaser before pressure washing, but I really do not want to have to scrape it with a scraper or putty knife.......
Any thoughts on here? Thanks
 
Last edited: May 3, 2022

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,954
2,936
153
Long Island, NY
May 3, 2022
#2
  • May 3, 2022
  • #2
Pretty sure with a good degreaser a regular cold pressure washer will do the trick.
I’d go with a gas one, as some of the electrics are not too powerful.
 
Reactions: Gs1987GT and limp

Potomus Pete

I'm still waiting for the fully nude shots
5 Year Member
Mar 7, 2019
3,308
1,223
153
Sarasota Florida
May 3, 2022
#3
  • May 3, 2022
  • #3
I have a nice pressure washer, and have de gunked a few, Especially my car when I got my fox. It was caked with twenty years of hard crusty oiled mess. Cold works nice just degrease it with lots of the stuff. Previous owner of mine never cleaned it, and of coarse it had small leaks everywhere. I loved how it cleaned up. So much I had to push it down the street two houses away.
 
Reactions: limp

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,253
17,937
224
Massachusetts
May 3, 2022
#4
  • May 3, 2022
  • #4
I used an electric pressure washer that I use mostly for clearing the mildew off the decks. I did my engine bay with it. It did the trick. No heat.

$200 Amazon SunJoe. Had it 5-6 years and no complaints
 
Reactions: limp

bird_dog0347

still married haven't seen testicles in years
15 Year Member
Jun 7, 2012
2,300
2,027
174
Little Elm, TX
May 3, 2022
#5
  • May 3, 2022
  • #5
I'd say if you really only want it for this one job, maybe see if there's someone in your area that offers Dry Ice blasting and see if the cost is close?
 

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,466
2,899
173
Florida
May 3, 2022
#6
  • May 3, 2022
  • #6
bird_dog0347 said:
I'd say if you really only want it for this one job, maybe see if there's someone in your area that offers Dry Ice blasting and see if the cost is close?
Click to expand...
Pretty sure I could find other uses for it around the place...
Looking at the HF Bauer electric 2300 psi brushless motor... For some reason I really dont want to do gasoline power........
Have a coupon....$220.....
 
Last edited: May 8, 2022

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,954
2,936
153
Long Island, NY
May 3, 2022
#7
  • May 3, 2022
  • #7
limp said:
Pretty sure I could find other uses for it around the place...
Looking at the HF Baurer electric 2300 psi brushless motor... For some reason I really dont want to do gasoline power........
Have a coupon....$220.....
Click to expand...
Maybe the new brushless ones are better than the older electric style. Aside from being less powerful, both electrics I’ve had developed some pretty bad leaks as well.

My gas one I’ve had for almost 10 years. One $65 pump off Amazon last year, and it’s like new again.
 
Reactions: limp

Potomus Pete

I'm still waiting for the fully nude shots
5 Year Member
Mar 7, 2019
3,308
1,223
153
Sarasota Florida
May 3, 2022
#8
  • May 3, 2022
  • #8
I got a $65 dollar pump off Amazon thats unbelievably powerful. It's made of Chineasium, but incredible power. I use it a couple times a month to strip house paint and pool decks. Better than a Comet $285 pump. Been good for a year
 
Reactions: Rdub6

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,466
2,899
173
Florida
May 3, 2022
#9
  • May 3, 2022
  • #9
Potomus Pete said:
I got a $65 dollar pump off Amazon thats unbelievably powerful. It's made of Chineasium, but incredible power. I use it a couple times a month to strip house paint and pool decks. Better than a Comet $285 pump. Been good for a year
Click to expand...
The "gear" pumps are alot better than the cheaper " wobble" pumps?
I keep thinking something simple that I just Plug in to work sounds good... Sometimes even a Car like that sounds good....... LOL
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,075
21,263
234
Box behind Walmart
May 3, 2022
#10
  • May 3, 2022
  • #10
Never point a pressure washer at anything you don't intend to clean.


/thread
 

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,466
2,899
173
Florida
May 3, 2022
#11
  • May 3, 2022
  • #11
Anyone have a recommended PSI?
 

Potomus Pete

I'm still waiting for the fully nude shots
5 Year Member
Mar 7, 2019
3,308
1,223
153
Sarasota Florida
May 3, 2022
#12
  • May 3, 2022
  • #12
You could go electric Home Depot one for under $200 if you only use it for light housework and cars. Gas ones are better, but you will have to drain them if your not going to use it much. I'd get a 2000 pressure Amazon gas for cars,drivway,ect.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
May 3, 2022
#13
  • May 3, 2022
  • #13
My harbor freight green electric pressure washer is almost at year 2 with no issues. I keep a wire down in the tip to keep it from corroding shut and grease the Orings often. No leaks and no issues at all. It was really cheap and has done everything from cleaning the gutters and siding to cleaning heavy mud and dirt off my truck. I'd recommend it 100%

A quick spry down with Gunk engine decreaser and a spray down with that cheap pressure washer and it'll clean up well. The higher pressure ones can get you into trouble with blowing paint and stickers off. The cheap one can too but is easier to manage.
 
Reactions: 1hot87gt
F

Fri Guy

15 Year Member
May 10, 2007
435
259
83
May 4, 2022
#14
  • May 4, 2022
  • #14
I have one of these and works great. Replace the hose with a uberflex hose and get a snubby gun and should handle all your washing needs.

Direct Tools Outlet Site

www.directtoolsoutlet.com
 

96pushrod

I think they're a little easier to get off
5 Year Member
May 15, 2018
1,530
871
133
Savannah
May 4, 2022
#15
  • May 4, 2022
  • #15

RYOBI 1600 PSI 1.2 GPM Cold Water Corded Electric Pressure Washer RY141612 - The Home Depot

The RYOBI 1600 psi Electric Pressure Washer features a light-weight, portable design with on board storage for user convenience. It is great for use on bikes, campers, grills, patio furniture and many
www.homedepot.com

I bought this ryobi model on Black Friday when it was on sale for like $60 or $70. My reasoning for going with it was the 3 year warranty that’s included, so if it ever s the bed I can just get a new one at Home Depot. Been a dependable unit so far, used it really just to wash the car and engine bay but it hasn’t given me any problems.

Plus they’re only $109 ($100 today) even when they’re not on sale. Idk if that’s the exact model number as they have a few, but I believe that is the exact same one.
 

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,466
2,899
173
Florida
May 4, 2022
#16
  • May 4, 2022
  • #16
Fri Guy said:
I have one of these and works great. Replace the hose with a uberflex hose and get a snubby gun and should handle all your washing needs.

Direct Tools Outlet Site

www.directtoolsoutlet.com
Click to expand...
Isn't direct tools the place that takes about 45 days for your order to arrive?
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,917
10,566
203
polk county florida
May 4, 2022
#17
  • May 4, 2022
  • #17
Do you need one like now??
 
F

Fri Guy

15 Year Member
May 10, 2007
435
259
83
May 4, 2022
#18
  • May 4, 2022
  • #18
limp said:
Isn't direct tools the place that takes about 45 days for your order to arrive?
Click to expand...
I honestly don't know. I purchased mine from Home Depot.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,253
17,937
224
Massachusetts
May 4, 2022
#19
  • May 4, 2022
  • #19
Here's an updated model of the one I bought. I just needed it for cleaning my decks so I didn't want to go crazy. But like i said, after pulling my engine it did a fine job cleaning the bay. I did spray a ton of Gunk Engine degreaser in there first, and then put simple green in the pressure washer.

I don't consider it heavy duty by any means but it's been fine for what i've used it for

Amazon product ASIN B00CPGMUXWView: https://www.amazon.com/Sun-Joe-SPX3000-Pressure-14-5-Amp/dp/B00CPGMUXW/ref=sr_1_1_sspa?crid=38JOM01Q6FRX8&keywords=Sun%2Bjoe%2Bpressure&qid=1651672728&sprefix=sun%2Bjoe%2Bpressure%2Caps%2C157&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExN1BIMllRODVYVEFJJmVuY3J5cHRlZElkPUEwNjg0MTIwMzI1T1kzVUY5NUdaMSZlbmNyeXB0ZWRBZElkPUEwOTMyMDYwMkRXTjNLRUFLS1daRiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1
 

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,466
2,899
173
Florida
May 4, 2022
#20
  • May 4, 2022
  • #20
General karthief said:
Do you need one like now??
Click to expand...
No, but next week would be nice
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

Engine compartment Detail tips and pointers...
  • CarMichael Angelo
  • Feb 19, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 26, 2019
Rdub6
J
  • Locked
SOLD '95 Cobra GR40 Griggs w/410ci forged stroker
  • Jer
  • Oct 24, 2018
  • SN95 Mustangs For Sale (1994-04)
Replies
15
Views
8K
SN95 Mustangs For Sale (1994-04) Jan 12, 2022
Jer
J
N
SOLD Supercharged 1989 SSP Coupe $13,500 obo
  • notchlubber
  • Jul 17, 2018
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
13K
Fox Body Mustangs For Sale (1979-93) May 28, 2020
notchlubber
N
Need Help, Car Wont Start, I've Gone Through Both Checklists
  • 93silverlx50
  • Jul 22, 2017
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
12K
Fox 5.0 Mustang Tech Apr 30, 2019
General karthief
Timing Cover/harmonic Balancer Removal And Replacement
  • jrichker
  • May 28, 2017
  • Fox 5.0 Mustang Tech
Replies
1
Views
16K
Fox 5.0 Mustang Tech Jul 6, 2024
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?