What should I put on the rocker studs on my AFR165's? AFR says they need to be sealed and torqued to 60 ft-lbs. They also say to use anti-seize on all bolts. But anti-seize isn't a sealer?? Should I use loctite blue, ARP moly lube, ARP thread sealant, or anti-seize?
the blue on the studs would be ok....the anti-seize is for all bolts that will be put "into" the heads, front brackets/intake bolts, that kinda stuff...the moly would be for like the cam/lifters/rockers....use thread sealant on the lower head bolts cause they run thru the water jackets and I use it for all the sensor threads...
We checked Jesse's AFRs, just to doublecheck, as AFRs intructions say to check em...they were good....thats like a liability thing to me (CYA)....same as getting an FTI kit...Ed states to check PV...like he's gonna sell you a combo thats gonna crash..
I think you throw a TQ wrench on there and you'll see they ok...they just should be checked....ya never know...