• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

AFR 185

  • Thread starter Thread starter Nopantz
  • Start date Start date Jan 31, 2006

Nopantz

New Member
May 26, 2003
234
0
0
NJ/US Merchant Marine Academy
Jan 31, 2006
#1
  • Jan 31, 2006
  • #1
I posted this on talk but this is definitely tech.....are AFR 185 with a decent cam and intake too much for a stock 302 block......until i can upgrade to a 331
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Jan 31, 2006
#2
  • Jan 31, 2006
  • #2
I read an article somewhere where a guy had a set of 185s on a 306 and with the right cam was making great low end torque numbers and great upper hp. The article made me decide to get the 185s and use them on my 302 until I can build a stroker. I'll try to dig up that article. Oh, I don't have the 185s yet, so I cant get you any numbers.
 

joncash

just high enough to be functional
Founding Member
Dec 9, 2000
756
4
39
The USA's peen
Jan 31, 2006
#3
  • Jan 31, 2006
  • #3
Stock block is no problem, they flow great at midrange lift and would probably do fine w/ a mild combination. BUT they have 2.02" intake valves, so that means you-know-what if you're using stock pistons.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Jan 31, 2006
#4
  • Jan 31, 2006
  • #4
P-V clearance will be a problem. With only 9:1 compression and 302 cu. inches I wouldn't do it.
 

Nopantz

New Member
May 26, 2003
234
0
0
NJ/US Merchant Marine Academy
Jan 31, 2006
#5
  • Jan 31, 2006
  • #5
i'll probably just go with a TFS Top End Kit...and just port everything when i get the stroker....thanks for the replies guys
 
You must log in or register to reply here.

Similar threads

1
Clearance
  • 1993mustang50
  • Apr 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
227
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 4, 2026
2000xp8
M
  • Poll Poll
Stroking a Mexico 289 or newer roller 302
  • MaryJaneTheMustang
  • Aug 12, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
163
1965 - 1973 Classic Mustangs -General/Talk- Aug 12, 2026
Bullitt347
K
Digital Tuning Going heads/cam/intake. Do I need a tune?
  • karhoot
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 14, 2026
karhoot
K
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
338
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
237
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?