Aftermarket Radio

S

ScituateFox

New Member

Dec 31, 2015

7

0

1

Jan 3, 2016

#1

• Jan 3, 2016

• #1

I've just installed a pioneer radio into my 88 GT, and I've come to realize the previous owner took out the stock amp. I have the radio wired up and it lights up when I turn the car on, but I'm not getting any sound. There are 2 plugs that went into the stock amp (1 for power and 1 for the speakers), but I don't know what to do from here. Advice?

 

Attachments

• image.webp

  133.1 KB · Views: 181

madspeed

Colonel Mustard

Founding Member

Nov 29, 1999

8,914

1,332

204

a van down by the river

Jan 8, 2016

#2

• Jan 8, 2016

• #2

thread moved to fox section. You should get some help

 

89oem

Mustang Master

Dec 18, 2013

1,456

542

144

Jan 8, 2016

#3

• Jan 8, 2016

• #3

Here ya go, start here then see what else you need - some applies some wont...

Fox - Stereo Install Questions.. | Mustang Forums at StangNet

 

Joe Kent (5.0 Joe)

Member

Dec 22, 2015

21

22

13

Tulsa, OK

Jan 9, 2016

#4

• Jan 9, 2016

• #4

Not 100%, but it looks like the connector on the bottom is the speaker harness, could you get pics of the wires on the bottom side of that connector? Also, the thread listed is mine, in that there is a harness listed from LMR that you may need to get and splice the wires. Looks like you are in a similar situation I am in...

 

89oem

Mustang Master

Dec 18, 2013

1,456

542

144

Jan 9, 2016

#5

• Jan 9, 2016

• #5

Those grey square plugs need to go, follow them and they'll connect with flat connectors about 6" further, look at my Amp pic. You can the next in line plugs to hook it up..

 

Reactions: Joe Kent (5.0 Joe)