Aftermarket Water Temp Gauge Help

Where did you tap in for for the water temp?

I used the port on the bottom of the engine block next to a freeze out plug. I can't remember what side. I know there is a picture of it here on the boards. Searching for autometer install or something like it should do the trick.

I have an 01, so I don't know if your block changed, but I know that I was able to use the adapters that came with the temp gauge.

actually I just re-read your post and it sounds like you put the sender where your ECT sensor should be. Usually on top of the crossover tube. If so I would put that sensor back

Here is the reference I used... Pic is in post #2

follow the words of wisdom at the bottom unless you want an anti-freeze shower

http://forums.stangnet.com/showthread.php?t=747913&highlight=autometer+guage+install

What was the second gauge?

Did your fan come back on and SES light go off?