• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

air silencer make a real difference?

  • Thread starter Thread starter jrc_03_gt
  • Start date Start date Feb 3, 2004
  • 1
  • 2
Next
1 of 2 Next Last

jrc_03_gt

New Member
Jan 1, 2004
786
3
0
Feb 3, 2004
#1
  • Feb 3, 2004
  • #1
Does the removal of the air silencer really make that much improvement? My only mods are a K&N air filter and a weld in of 40 series flowmasters. Should I just leave it alone? This stang only has 1200 miles on it.
 

KaPPaBaLL

New Member
Nov 28, 2003
1,326
0
0
BAYAREA
Feb 3, 2004
#2
  • Feb 3, 2004
  • #2
it'll get little more air but you'll hardly gain anything. Take it off just for the "thought" of it. Who knows, maybe you'll think you're going faster without it and drive even better. lol
 

Beau

Founding Member
Jan 29, 2000
3,050
0
0
San Diego
Feb 3, 2004
#3
  • Feb 3, 2004
  • #3
well its a silencer..so..your car won't be as silent. thats about it.
 

jrc_03_gt

New Member
Jan 1, 2004
786
3
0
Feb 3, 2004
#4
  • Feb 3, 2004
  • #4
It does not sound like its worth the trouble.
 

jadesville

the polarbear conservation corps protects a polarb
20+ Year Stangneter
Oct 8, 2003
2,189
0
47
Gresham, OR
Feb 3, 2004
#5
  • Feb 3, 2004
  • #5
jrc_03_gt said:
It does not sound like its worth the trouble.
Click to expand...

its one bolt and some tugging, the whole thing is up for debate, it helped some people, for others it didnt...
 

xenon

New Member
Jun 17, 2003
379
0
0
Ottawa, Canada
Feb 3, 2004
#6
  • Feb 3, 2004
  • #6
On the Kenne Bell website they state.. For every 10 degree increse of heat you loose 1% of the horepower... The Fender is about 70 degrees and the heat under the hood is over 200 so do the math.
 

menasci

Member
Aug 17, 2003
640
1
16
Chandler, AZ
Feb 3, 2004
#7
  • Feb 3, 2004
  • #7
Just trim it.
Cut the end off so it just goes inside the fender hole about 1/2 inch.
This makes a larger opening and still draws in cool air.
 
9

93cobraxx

Founding Member
Sep 2, 2002
52
0
0
Feb 3, 2004
#8
  • Feb 3, 2004
  • #8
i picked up 4.5 hp and 5 ftlbs on the dyno from removing the air silencer, on a stock car ,1600 miles
 

Beau

Founding Member
Jan 29, 2000
3,050
0
0
San Diego
Feb 3, 2004
#9
  • Feb 3, 2004
  • #9
93cobraxx said:
i picked up 4.5 hp and 5 ftlbs on the dyno from removing the air silencer, on a stock car ,1600 miles
Click to expand...
 

MT1083

New Member
Sep 16, 2003
1,033
0
0
Charlotte, NC
Feb 3, 2004
#10
  • Feb 3, 2004
  • #10
I don't think I would do it. All your doing is sucking in hot air.
 

01GT eibach

Active Member
Nov 18, 2002
1,075
0
36
Pittsburgh, PA
Feb 3, 2004
#11
  • Feb 3, 2004
  • #11
5.0 Mustang magazine dyno'd a stock 4.6L and got a couple of rwhp in the upper revs, but lost a bunch of torque down low. Even before reading that, I decided to keep mine the way it is. ... just one opinion ...
 
9

93cobraxx

Founding Member
Sep 2, 2002
52
0
0
Feb 3, 2004
#12
  • Feb 3, 2004
  • #12
i didnt lose any low end, picked up a solid 5 ftlbs all the across the board, dynoed 236 hp and 280 ft lbs SAE on a stock car with air silencer removed
 

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
Feb 3, 2004
#13
  • Feb 3, 2004
  • #13
I did it on my 01 and didnt notice anything. I trimmed it on my 03 and didnt notice anything either.
 

StngStr

Member
Jun 24, 2003
616
0
17
Central Florida
Feb 3, 2004
#14
  • Feb 3, 2004
  • #14
xenon said:
On the Kenne Bell website they state.. For every 10 degree increse of heat you loose 1% of the horepower... The Fender is about 70 degrees and the heat under the hood is over 200 so do the math.
Click to expand...

When you're driving down the road in 70 degree weather, the air under the hood where the silencer was is not 200 degrees. The air is so turbulent under there (from the fan and from driving) that it's at most 10-20 degrees warmer. I'm sure if you were just sitting there in traffic it could get up to 200 degrees under there, but when sitting there how much hp do you really need?
 

jrc_03_gt

New Member
Jan 1, 2004
786
3
0
Feb 3, 2004
#15
  • Feb 3, 2004
  • #15
I think I will leave mine in for now.
 

decoy562

New Member
Oct 9, 2003
1,526
0
0
Acworth, GA
Feb 3, 2004
#16
  • Feb 3, 2004
  • #16
I took mine out, and it idled badly, so I put it back in and left it there, no problems. I don't think its worth it, you don't really gain anything from it.
 

302cobra97

New Member
Jan 29, 2004
28
0
0
St. Louis
Feb 3, 2004
#17
  • Feb 3, 2004
  • #17
I bought my cobra from a private seller and it was already removed and i forgot to check for it when i bought it. Now i wish that it was still in or i could get it back after reading this page.
 
J

jas142

Founding Member
Feb 11, 2002
1,358
0
0
Feb 3, 2004
#18
  • Feb 3, 2004
  • #18
I felt a small gain, and its a *tiny bit* louder. It takes like 2 minutes to take it out and it goes back in just as easily.. take it out and see if you like it. If you don't, put it back in. On another note, for people WITH the silencer removed: Any gains to be had from enlarging the hole on the airbox? Theres only a small area for air to flow in.
 

WRXracer

New Member
Feb 28, 2003
825
0
0
Feb 3, 2004
#19
  • Feb 3, 2004
  • #19
yeah

went to the track with my airsilencer in ran 14.3 like 4 times.. then I took it out and the rest of the nite I ran 14.0.. then next few times got it to 13.8..
 

Islander03GT

New Member
Jan 19, 2004
470
0
0
Simi Valley, Ca
Feb 3, 2004
#20
  • Feb 3, 2004
  • #20
93cobraxx said:
i picked up 4.5 hp and 5 ftlbs on the dyno from removing the air silencer, on a stock car ,1600 miles
Click to expand...

I'd like to see the dyno graph for it.

And dropping 3/10ths after removing it could also be because it was getting later and the air temp was lower.

I like free mods as much as the next guy but I'm always skeptical about the gains that people produce on them. I'm gonna test the silencer theory at MDD7 on Sunday the 22nd... mid day racing so the temp should be relatively constant.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

What cold air intake and filter are you using in your foxbody?
  • Mindseye007
  • May 11, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 7, 2024
from6to8
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
160
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
161
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:05 PM
AeroCoupe
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
704
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
293
The Welcome Wagon Oct 19, 2025
Clutchfork
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?