All with plenum and strut tower brace.....

[SpartaPerformance]

... I know there is a member with the FRPP strut tower brace with the FRPP plenum cover, Did you need to shim in to fit?? What about the member with the v-6 brace??

 

[Preston951]

... I know there is a member with the FRPP strut tower brace with the FRPP plenum cover, Did you need to shim in to fit?? What about the member with the v-6 brace??

The Bullit & V6 brace both will work on the GT & clear the plenum cover fine.

 

['69 Hardtop]

The V8 brace just doesn't have the clearance with the factory intake cover. The only way would have been to add some shims like you suggested, but you might run into clearance issues with the hood. If I remember correctly, I would have needed to add about 1/4" to 3/8" of an inch worth of shims to it to get it to fit. I eventually upgraded to the Bullitt (same as the V6) brace and it fits great.

 

[partsbill]

I have the oem Bullitt brace which is the same brace as the FRPP V6 brace,
clears the oem manifold cover with room to spare, no need to shim.

 

[jay07]

I still want a strut tower brace that will work with my super shaker

 

[stanmckinney]

I have the V6, Bullitt brace on my GT. No problems clearing the cover.

 

[Preston951]

I still want a strut tower brace that will work with my super shaker

Lol, didn't they make one for the old Mach 1s??? I don't think your request is too ridiculous... Maybe someday?

 

[SpartaPerformance]

Thanks guys, I appreciate the info! Looks like I'm going with the V-6 brace then.

 

[stanmckinney]

Check Blue Oval Industries.com
They had and may still have a terrific price on it.
I got mine brand new in the Ford box in two days for $159.95.

 

[jasonh328]

The Steeda non-adjustable brace will also fit.

 

[xgto]

Will the GT500 SVT brace fit with the plenum cover on a GT ?
http://cgi.ebay.com/ebaymotors/ws/e...0506685850&viewitem=&sspagename=STRK:MEWAX:IT

 

[Wraith413]

Not according to the Ford Racing website.
Here's the link;
Ford Racing Performance Parts - [Part Details]

 

[xgto]

The unit listed on ebay is not the double tube , it's the single tube brace.

 

[Sparty92]

I have the oem Bullitt brace which is the same brace as the FRPP V6 brace,
clears the oem manifold cover with room to spare, no need to shim.

Does that etched logo plate come painted, or did you paint it?

 

[Five Oh Brian]

I have the FRPP STB (for a 2010 GT) on my 2007 GT (it was given to me) and I simply used a round file to notch the plenum cover a bit so that I wouldn't have to shim the STB.