• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Alternator Questions...

  • Thread starter Thread starter BusBoy
  • Start date Start date Mar 30, 2007

BusBoy

New Member
Mar 30, 2007
5
0
0
California
Mar 30, 2007
#1
  • Mar 30, 2007
  • #1
Alternator Questions... SOLVED!

Hey there gang...

I have a 66 conv with a 87 5.0 conversion in it. I wanted to upgrade the stock alternator so I picked up a Powermaster alternator. Now me being a noob and not really wanting to modify the electrical i went with a NON one wire model.

I open the box and go to the garage to install it... hmmmm my stock alternator has two connectors where the new Powermaster doesnt. I am missing something?? The new Alt has the small plug that plugs in no problem but the wiring on the car still has a pigtail and from teh gauge of the wire looks to be the charging ones.

Can someone whos maybe done this swap give me a hand out on this? I can post pics later if needed.

thanks everyone!
 

katshot

Member
Dec 29, 2006
17
0
7
Dover, DE.
Mar 30, 2007
#2
  • Mar 30, 2007
  • #2
Just a guess but maybe the new one is internally regulated whereas the original one was externally regulated?
 

BusBoy

New Member
Mar 30, 2007
5
0
0
California
Mar 30, 2007
#3
  • Mar 30, 2007
  • #3
katshot said:
Just a guess but maybe the new one is internally regulated whereas the original one was externally regulated?
Click to expand...

Heh... i knew my noob factor would creep into this somewhere! The new one is internally regulated, but I have no idea if the old one was... this was a complete swap so everything electrical on the 5.0 was/is stock.

So I guess my question no is... was the 87 5.0 internally or externally regulated?

ps thanks for the quick reply Kat... rated you up @ cardomain.
 

katshot

Member
Dec 29, 2006
17
0
7
Dover, DE.
Mar 30, 2007
#4
  • Mar 30, 2007
  • #4
A '66?!
Not that I'm an expert but I don't think I've ever seen an internally regulated alternator from that era. hopefully, someone who IS an expert on the subject will jump in here for you.
Oops! Sorry, now that I'm re-reading your post, you're saying that the harness you're using is from the '87. THAT I can look up for you. I'll check it and get right back to you.
 

BusBoy

New Member
Mar 30, 2007
5
0
0
California
Mar 30, 2007
#5
  • Mar 30, 2007
  • #5
katshot said:
A '66?!
Not that I'm an expert but I don't think I've ever seen an internally regulated alternator from that era. hopefully, someone who IS an expert on the subject will jump in here for you.
Click to expand...

Clarification... since this was a 5.0 "Upgrade" into my 66 we just took a complete motor and trans from a 87 and slapped it into the 66... all electrical on the motor is stock... sans the alternator now.

Soooo for a 1987 5.0 did it have a external voltage regulator
 

katshot

Member
Dec 29, 2006
17
0
7
Dover, DE.
Mar 30, 2007
#6
  • Mar 30, 2007
  • #6
It was internally regulated. I have the schematic on my computer. What do you want to know?
 

BusBoy

New Member
Mar 30, 2007
5
0
0
California
Mar 30, 2007
#7
  • Mar 30, 2007
  • #7
katshot said:
It was internally regulated. I have the schematic on my computer. What do you want to know?
Click to expand...

well theres two plugs on the stock alt and two pigtials on the harness both are/were plugged in...

the new powermaster has one (the small oval one...) which is plugged in. i dont know what the other pig tail is (larger plug 4 wire i think) that was plugged into the stock alt nor where i need to wire it to... Im guessing its the charge wires.
 

katshot

Member
Dec 29, 2006
17
0
7
Dover, DE.
Mar 30, 2007
#8
  • Mar 30, 2007
  • #8
Hard to be 100% sure by the schematic but from what I see, there's basically two main external connections on the '87. One is a Lt. Green/Red wire that goes to the idiot light in the dash, and the other is a group of wires (3 actually) that ALL connect to fusible links (12v+).
 

Aryan15

Member
Sep 22, 2003
236
0
17
CA
Mar 30, 2007
#9
  • Mar 30, 2007
  • #9
Try this.
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif
 

BusBoy

New Member
Mar 30, 2007
5
0
0
California
Mar 30, 2007
#10
  • Mar 30, 2007
  • #10
Fixed...

here the solution if someome happen to search for this...

Only two wires need to be connected to the new alternator. Cut off both of the stock 5.0 connectors where they Y together into one harness. In the stock 5.0 harness there will be a green/red stripe wire, connect that to the matching green/red stripe wire on the plug that came with the new alternator, cap off all other wires so as not to cause a short. Using a ring terminal, run a new 4 gauge wire off the large stud directly to the positive terminal of the battery.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Mar 30, 2007
#11
  • Mar 30, 2007
  • #11
I thought you were supposed to run a diode in the wiring kinda as a 1 way check valve of the electricity world.
 

katshot

Member
Dec 29, 2006
17
0
7
Dover, DE.
Mar 30, 2007
#12
  • Mar 30, 2007
  • #12
BusBoy said:
Fixed...

here the solution if someome happen to search for this...

Only two wires need to be connected to the new alternator. Cut off both of the stock 5.0 connectors where they Y together into one harness. In the stock 5.0 harness there will be a green/red stripe wire, connect that to the matching green/red stripe wire on the plug that came with the new alternator, cap off all other wires so as not to cause a short. Using a ring terminal, run a new 4 gauge wire off the large stud directly to the positive terminal of the battery.
Click to expand...

I'm not so sure that's a good idea. By the looks of the wire sizes, you're only connecting a rather small wire and it won't be able to carry a very big load.
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Mar 31, 2007
#13
  • Mar 31, 2007
  • #13
he'll find out if it's done right if and when wiring starts melting............
 

katshot

Member
Dec 29, 2006
17
0
7
Dover, DE.
Apr 1, 2007
#14
  • Apr 1, 2007
  • #14
tmoss said:
he'll find out if it's done right if and when wiring starts melting............
Click to expand...

Maybe. Or it could manifest itself as weak performance in an accessory, dim headlights or possibly an undercharged battery.
 

gunmetal5.0

New Member
May 10, 2006
144
0
0
Chico, CA
Apr 1, 2007
#15
  • Apr 1, 2007
  • #15
I think it should be an 8 gauge wire.
 
You must log in or register to reply here.

Similar threads

F
3G Alternator install question
  • fathead429
  • Oct 24, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
7
Views
266
1974 - 1978 Mustang II Talk & Tech Oct 25, 2026
LILCBRA
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
270
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
W
Electrical 91 GT Alternator Replacement Question
  • willrh111
  • Oct 22, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
516
Fox 5.0 Mustang Tech Oct 23, 2025
nickyb
A
Resolved Electrical Help Please
  • Alabama
  • Jan 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
379
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 22, 2026
AeroCoupe
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
691
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?