aluminum flywheels?

http://www.ultrarev.com has the fidanza for $319. i just got mine from there. this is by far the finest flywheel i have seen. it has a replaceable friction surface, and one of the best features it has is that it comes at a 0 imbalance and includes both the 50oz and 28oz weights. if you buy a fidanza, you should never have to make that purchase again. i just bought my second one for my new stang and wouldnt go with anything else.

I believe fidenza makes spec flywheels.

You can find the alum fidenza's on Ebay for $280 or so, but like said above, I paid $320 through my builder as I don't do Egay. It is a very nice piece. Make sure you use the supplied loctite in the dowel pins and weight bolts.

stang_dan said:

they come with bolts and pins?

i dont use egay either too risky and too many con arstist i rather pay the little bit more.

dan

Click to expand...

They come with dowel pins and bolts for the weight, but no bolts to bolt it to the crank. You want arp bolts for that. Part # arp-200-2802. Use blue loctite on the threads and tq it to 70-90 ft/lbs. Then use blue loctite also on the pressure plate bolts and tq it to I think 24 ft/lbs.