Amp Rack

the wieght on that has to kill your 1/4s

I don't have the amps in yet (still working on wiring) but heat should not be a problem. The top doesn’t go all the way up the speaker enclosure under the rear window, so air will flow to the trunk area where the subs are going.

As far as weight, its 1/2" MDF and weighs 10 lbs with mounting hardwear. Its the price you pay, although I toyed with the idea of making everything removable, but the wiring is the biggest problem. I thought of using military vehicle/helicopter type connecters/disconnect but its too much of a pain.

I used some pig tails out of a wrecked car and spliced in my existing wires. So now I can unhook everything quickly. The only ones that slow me down are the power and ground, but I'm working on those with some Winston Cup style battery plugs there about $45 but it will be worth it.

Anderson Connectors for power & ground . . . a snap . . . literally . . .

Thats an idea, I'll look into that.

all great ideas, the biggest reason I havent built a rack is that everything I looked into doing would make getting the spare out a pain in the butt... Whats the clearance on that setup as far as removal?