Anderson N-91 cam?

[Supersonic G.T.350]

Just wondering how many of you guys are running this? I'm kinda weighing it against a solid roller. Do any of you guys have the specs. Anderson doesn't disclose that info. Most people seem to be happy with the Anderson cams, I ;ve been thinking I might try one. BTW, I don't really need anything custom, it's just a toy not a race car.

Thanks
James

 

[Grn92LX]

More info needed. Whats the combo? Goals? The AFM N91 cam works very well.

 

[Supersonic G.T.350]

347, Gonna try to get comp. around 11:1, Vic Jr's, thinking about a Funnel web, 1-3/4 headers and 3" exhaust, 750 mighty demon. Things can vary from this a little but it's a general idea. It's just a toy not a race car.

 

[5spd GT]

It will work fine with matching valve springs

 

[Grn92LX]

What gears do you have? You'll need a 4.30-4.56 to take advantage of the N91 in that combo. You'll also have to mill those jr heads to achieve the compression you want.

.576, 240/248 are the @.050 specs. I dont have the o/c events off hand. You'll need springs and i'd do titanium retainers for the rpm you'll be turning with that combo. Expect around a 7,200 rpm shift point. I love high revvers!

 

[EMW150]

You'll be real happy with it. As set above, go with at least 4:30s but preferably 4:56s.

 

[Supersonic G.T.350]

You'll be real happy with it. As set above, go with at least 4:30s but preferably 4:56s.

What's your N-111 like? Do you have any sound clips?

 

[EMW150]

What's your N-111 like? Do you have any sound clips?

The 111 is one step higher than the 91. I shift it at 7,600-7800. It wakes up hard at 4500 and pulls hard to 7800. Pretty radical idle. Sorry, don't have any soundclips. Specs are 248 / 258 @ .050 .576 lift

 

[Supersonic G.T.350]

Thinking it over a little maybe the N-71 would be a little better for me. I didn't realize the N-91 was so radical. I don't want to have to run a 4.30 gear. I've got a new set of 3.90's and really want to use them. I think I could get by with the M-71 and my 3.90 gears. I was also looking at Andersons ported Trick Flow heads so I might go this route. Like I said earlier, my plans weren't set in stone, I'm just filtering out some of the best ideas. Would anyone have N-71 specs?

 

[Grn92LX]

232/240, .576.

 

[Supersonic G.T.350]

232/240, .576.

Thanks, do you have one? How are you guys getting these specs? I didn't think that Anderson released them. That sounds like the specs of a comp 282.

 

[5spd GT]

The numbers are all over the internet Just do a search...

 

[Supersonic G.T.350]

Should I JUST SEARCH ANDERSON CAM SPECS?