• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Another Exhaust Question

  • Thread starter Thread starter 94GTLaserRC
  • Start date Start date Jan 30, 2006
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
Next
First Prev 5 of 6 Next Last

stprorolla49

Active Member
Oct 9, 2004
1,455
15
39
Fairfield, CT/North Jersey
Feb 5, 2006
#81
  • Feb 5, 2006
  • #81
Green 94 5.0 said:
rob, trust me.....the american thunder catback is plenty loud. anything more than that and you better keep a bottle of advil in the car to deal with the migraine headaches.
Click to expand...
just the way i love it
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 5, 2006
#82
  • Feb 5, 2006
  • #82
Now you guyz are REALLY confusing the $hit out of me.

When I talked to a local muffler shop, they told me for sure that they would charge MORE for labor for a complete catback than they would to weld in Mufflers...so the savings with JUST mufflers would be better.

How about the "DELTA" series? When I looked at the Flowmaster website, it looks like those are just a tad quieter than the regular 40's.

RC
 

R.J.

Member
Aug 20, 2003
813
0
16
Warwick, Rhode Island
Feb 5, 2006
#83
  • Feb 5, 2006
  • #83
The DELTA series is what the American Thunder kit comes with, yes they are a lot quiter than the Original 40 series. The little bit of a difference shown in Flowmasters graph, does not correctly show how much louder the original 40 series are.
The prices work out to about the same if you are buying flow pipes and tail pipes new. If you just have mufflers welded into your current set up than yes it will be a lot cheaper.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 5, 2006
#84
  • Feb 5, 2006
  • #84
RJ...if you were to rate loudness of the 3's, delta 2's, and and 40 2's on a scale of 1-10, what would it be (loudness)

In terms of "pitch" what would you rate them each?

Thanks
RC
 

R.J.

Member
Aug 20, 2003
813
0
16
Warwick, Rhode Island
Feb 5, 2006
#85
  • Feb 5, 2006
  • #85
Delta 2's are twice as loud as 3's and 40 2's are twice as loud as Delta 2's.
So on a scale from 1-10
3's: 3
D2's: 6
40 2's: 12!!!!!!!!!

I've had 3's and have D2's
My best friend has 40 2's
So I can be sure these numbers are accurate. I didn't know about the diff between D2's and 40 2's until it was to late and I bought an American Thunder kit. Now I know and as soon as I need mufflers 40 2's are going in. (p/n 42543) Do it right the first time!!!!!!!!
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 6, 2006
#86
  • Feb 6, 2006
  • #86
R.J. said:
Delta 2's are twice as loud as 3's and 40 2's are twice as loud as Delta 2's.
So on a scale from 1-10
3's: 3
D2's: 6
40 2's: 12!!!!!!!!!

I've had 3's and have D2's
My best friend has 40 2's
So I can be sure these numbers are accurate. I didn't know about the diff between D2's and 40 2's until it was to late and I bought an American Thunder kit. Now I know and as soon as I need mufflers 40 2's are going in. (p/n 42543) Do it right the first time!!!!!!!!
Click to expand...

WEll, if I have 3's now and just want to wake it up a bit, I guess the Deltas are the ones I want (or MAC flow paths?)

If they can "spare" my 3's when they cut them out, I can either sell them or keep them in case I dont like the Deltas.

I have to go under the car on Tuesday to check the SS. Ill see if I can find the PN on those mufflers.

Thanks
RC
 
G

Green 94 5.0

Founding Member
Mar 25, 2002
2,601
12
79
Ft. Lauderdale, FL
Feb 6, 2006
#87
  • Feb 6, 2006
  • #87
did you give up on doing the wrenching yourself rob? you keep mentioning the cost of labor for a muffler shop to install a BOLT ON catback. cost of labor shouldnt even be a consideration if you go that route.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 6, 2006
#88
  • Feb 6, 2006
  • #88
Green 94 5.0 said:
did you give up on doing the wrenching yourself rob? you keep mentioning the cost of labor for a muffler shop to install a BOLT ON catback. cost of labor shouldnt even be a consideration if you go that route.
Click to expand...
The problem is 2-fold:

1. I still need them to do my tips..they have to be cut and welded.

2. Because I dont know what the h3ll Im doing under the car, I need a little help...I tried calling one of my cough friends cough to ask for a little help but "HE" didnt return my call.

Anyway, isnt the shop needed to get all the right bends/angles/etc so that everything lines up?
RC
 

stprorolla49

Active Member
Oct 9, 2004
1,455
15
39
Fairfield, CT/North Jersey
Feb 6, 2006
#89
  • Feb 6, 2006
  • #89
94GTLaserRC said:
The problem is 2-fold:

1. I still need them to do my tips..they have to be cut and welded.

2. Because I dont know what the h3ll Im doing under the car, I need a little help...I tried calling one of my cough friends cough to ask for a little help but "HE" didnt return my call.

Anyway, isnt the shop needed to get all the right bends/angles/etc so that everything lines up?
RC
Click to expand...
negative....if youve got a jack, jackstands, and some tools, the catback can be installed in about 45 min tops....its ony 4 bolts and a few hangers....
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 6, 2006
#90
  • Feb 6, 2006
  • #90
stprorolla49 said:
negative....if youve got a jack, jackstands, and some tools, the catback can be installed in about 45 min tops....its ony 4 bolts and a few hangers....
Click to expand...
I have to go under the car to look at the speed sensor tomorrow...Ill check it out. Still gotta worry about the tips though...even though there is a shop really close by where I know the owner...they do mainly stereos and alarms, but they have a good tech there that welds in fart cans for the ricers...he could prolly redo the tips.

RC
 

stprorolla49

Active Member
Oct 9, 2004
1,455
15
39
Fairfield, CT/North Jersey
Feb 6, 2006
#91
  • Feb 6, 2006
  • #91
94GTLaserRC said:
I have to go under the car to look at the speed sensor tomorrow...Ill check it out. Still gotta worry about the tips though...even though there is a shop really close by where I know the owner...they do mainly stereos and alarms, but they have a good tech there that welds in fart cans for the ricers...he could prolly redo the tips.

RC
Click to expand...
maybe i misunderstood...would you be using the shop to instal a new catback, or to weld in new muffs with your stock flowtubes and aftermarket tails?
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 7, 2006
#92
  • Feb 7, 2006
  • #92
stprorolla49 said:
maybe i misunderstood...would you be using the shop to instal a new catback, or to weld in new muffs with your stock flowtubes and aftermarket tails?
Click to expand...

Well, when I thought of ONLY the mufflers....it was the shop...Then they told me it would be cheaper to buy new mufflers and pay for them to weld them in than it would be to buy new catbacks and pay them to install it....That's what the comparison was.

Having said that, I need my tips cut and re-welded anyway, so Im still not sure what to do. I could REALLY use some help from a local guy
RC
 
G

Green 94 5.0

Founding Member
Mar 25, 2002
2,601
12
79
Ft. Lauderdale, FL
Feb 7, 2006
#93
  • Feb 7, 2006
  • #93
ill help you install the catback rob.....go the route that i suggested, you wont be sorry. aside from the nicer sound, the 2.5" mandrel bent piping will also provide a performance gain over the stock piping that is on there now.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 7, 2006
#94
  • Feb 7, 2006
  • #94
Green 94 5.0 said:
ill help you install the catback rob.....go the route that i suggested, you wont be sorry. aside from the nicer sound, the 2.5" mandrel bent piping will also provide a performance gain over the stock piping that is on there now.
Click to expand...
:Word:

Im going to be out in the garage from about 10:30 to noon this morning...give me a buzz...If your car is running, Id like to take a listen anyway. (going to go under to check out the speed sensor, and oil leak, and the current flowmaster PN)

RC
 
G

Green 94 5.0

Founding Member
Mar 25, 2002
2,601
12
79
Ft. Lauderdale, FL
Feb 7, 2006
#95
  • Feb 7, 2006
  • #95
unfortunately im already at work and dont get out until 1am.....
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 7, 2006
#96
  • Feb 7, 2006
  • #96
Green 94 5.0 said:
unfortunately im already at work and dont get out until 1am.....
Click to expand...
Well....GOOD news/ BAD news:

Bad: Wont be changing the sound anytime soon.

Good: Wont cost me anything...


I went under the car to find out for sure which mufflers were on the car...I couldnt find a PN, so I called Flomaster ...

By the measurements, and the burn pattern of the inside mufflers (left on the outer muffler) he was able to determine that they are more than likely ORIGINAL 40 series mufflers. The length is 13+" (2 chamber) and the triangular burn pattern tells him that they are NOT deltas.

So, I guess Ill keep these until I get the new motor. I definitely do NOT want quieter.. Maybe a 3" system will be in order next time.

I dont think mine are too loud or have too much drone, so I guess Im lucky in that regard.


THANKS TO ALL OF YOU WHO RESPONDED WITH YOUR GREAT INFO.

ROg....You STILL get a beer or 2 and a dip in the hot tub for the offer!!

Thanks
RC
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
Indianapolis, IN
Feb 7, 2006
#97
  • Feb 7, 2006
  • #97
Whats the deal on the burn pattern? I've never heard of that.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 7, 2006
#98
  • Feb 7, 2006
  • #98
nmcgrawj said:
Whats the deal on the burn pattern? I've never heard of that.
Click to expand...
I guess I could have takes some pics..


Basically since my mufflers are 10 years old, the inside weld pattern from the inside has caused faint burn marks on the outside of the mufflers...almost like rust, but just discolored.

there is a left to right pattern just behind the entrance pipe, then a triangle pattern underneath..like this

________________

- - - - - - - - -
-
- -
- -


_________________


The top line is the front end, the bottom is the back..the dashes are the relative positions of the markings


RC
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 7, 2006
#99
  • Feb 7, 2006
  • #99
damn...it didnt come out right...let me quote it and try to redo it by inserting periods in between
RC
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Feb 7, 2006
#100
  • Feb 7, 2006
  • #100
94GTLaserRC said:
I guess I could have takes some pics..


Basically since my mufflers are 10 years old, the inside weld pattern from the inside has caused faint burn marks on the outside of the mufflers...almost like rust, but just discolored.

there is a left to right pattern just behind the entrance pipe, then a triangle pattern underneath..like this

________________

- - - - - - - - -
..... -
....- ...-
. - ......-


_________________


The top line is the front end, the bottom is the back..the dashes are the relative positions of the markings


RC
Click to expand...


That looks a little better...you get the idea
RC
 
Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
Next
First Prev 5 of 6 Next Last
You must log in or register to reply here.

Similar threads

New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
163
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
342
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
T
Resolved Exhaust/Muffler tips
  • Tom77
  • May 9, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
6
Views
497
1965 - 1973 Classic Mustangs -General/Talk- May 9, 2025
Tom77
T
G
Quiet my 2015 GT on the cheap
  • gsrblack
  • Feb 12, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
6
Views
906
2015 - 2023 (S550) Mustang -General/Talk Apr 16, 2025
gkomo
L
Is catback worth it over axle backs?
  • Lorencarson
  • May 15, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
2
Views
804
2005 - 2014 S-197 Mustang -General/Talk- May 15, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?