Don't forget to go back and snag the oil cooler off that turbo coupe. It's the same oil-to-water cooler that they stuck on 5.0 police pursuit Mustangs, and it's cheap insurance for any 5.0. On the 2.3 liter turbos, it's sandwiched between the oil filter and the oil filter mounting pad on the side of the block. You'll need a mondo wrench or socket to unscrew the through-bolt that holds it to the oil filter pad -- 1" or 1-1/8" I think. Be sure to get the rubber o-ring that seals it if it sticks to the block. On the 5.0, there were originally molded hoses that fed the bypassed coolant down from the pipe feeding the heater core at the front of the manifold and back up to the water pump, but you can just use generic heater hose instead of the original molded hoses. You'll have to use the short police style oil filter, FL300 I think, but I think the minimal loss in filter area is more than offset by the benefits of having the engine oil cooler. I've been running them on both my 5.0's for years and like I said, it's cheap insurance. I think the going junkyard price for one of the coolers should be about $5. Coming on all 2.3 turbo motors, they used to be a dime-a-dozen but they are getting somewhat rare. That cooler is a classic design and I think Ford still uses it on some models.