Any guess on how fast?

[Redrooster]

I'm putting together a motor for my coupe, trying to get ready for FFW in atlanta. Anyone want to take a guess as to how fast it will go. Here's the combo:
93 coupe 3250 lbs w/ me
DSS 306
TW stage 2 porting flowing 300 cfm at .600 lift/ 244 on ex.
Trick flow track heat intake/ port matched to heads
bennett custom grind cam (Big)
#30 lbs injectors
75mm tb
80mm MA
1 5/8 longtubes
compucar nitrous/ 175 hp shot
UPR upper and lower control arms
3.73 gear
m/t street et's 26 x 11.50
stock t-5 grenade.

 

[brands5.0]

I would say with a GOOD lanch and GOOD shifting and a GOOD nitrous tune. Any where from 10.60-11.00 at 127-123mph but thats a guess. thats with what about 375-400 na rwhp and a 175 shot. But i am by know means an expert

 

[rsw007]

mid 10's if the tranny stays in one peice. and it might be over geared. dont know how high you plan to turn the motor.

 

[Redrooster]

I was looking for about 340-360 at the tires. I think anymore than that is a stretch. Bennett said 10.60 on the gas 11.60 on the motor shifting around 6600. We will see. I personally don't think it will go that fast. I'm looking for 12.20 on the motor and maybe 11.00- 10.90 on the gas. 10.60 would be great though.

 

[Michael Yount]

...or you could coast through the traps at about 55 mph with a broken T5....

 

[Redrooster]

I think it will last a few rounds. You never know. It might take a dump the first time I bang 3rd with the gas on. Thats why i'm trailering it to FFW.