Any onewith a 01+ factory hood scoop help me out

Hammer1999Gt · May 1, 2004

I am trying to install a scoop off a 03 on my 99 and I would greatly appreciate it if some one could measeure the distance from the back of their scoop to the back of the hood. The ford dealership in my town doesn't have any GTs (I know its hard to beleive but everyone around here is a farmer and buys trucks). If some one could do this from me it would be awesome.
Thanks

snoopy98 · May 1, 2004

i would if i had a tape messure sorry.

snoopy98 · May 1, 2004

i could take really detailed pictures if you want? i have a really good camera and i could take pictures from diffrent angles let me know if you want me to do that?

snoopy98 · May 1, 2004

here they go hope they help some

Hammer1999Gt · May 1, 2004

Thank you for the pictures that helps some but I would like some measurements before I go ahead and start drilling holes

JonJon · May 1, 2004

Goto a Ford dealership...
I don't have a tape measure

todd4566 · May 1, 2004

The distance is right around 4 inches from the back of the scoop to the back of the hood - the straight part, not where the hood dips. To the very back of the hood, the distance is more like 14cm. Hope that makes sense. I did this project as well. Take your time, and good luck!

Hammer1999Gt · May 1, 2004

Thank you for your help I just got done mounting it and it will look good once all of the car is painted.

Any onewith a 01+ factory hood scoop help me out

Hammer1999Gt

Member

snoopy98

snoopy98

snoopy98

Hammer1999Gt

Member

JonJon

todd4566

Hammer1999Gt

Member

Similar threads

Any onewith a 01+ factory hood scoop help me out

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency