• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Anybody guess a HP rating on this config.

  • Thread starter Thread starter funcrusher
  • Start date Start date Apr 28, 2004
F

funcrusher

New Member
Jul 24, 2002
27
0
0
Virginia
Apr 28, 2004
#1
  • Apr 28, 2004
  • #1
I am the proud owner of a 96 GT. It currently has a 70mm TB, short throw shifter and an edelbrock 80 shot system. I just bought a vortech supercharger, Grannatelli 80 mm MAF sensor, Ford 30# injectors, and a BBK adjustable fuel pressure regulator, as well as Richmond 4.10s Eaton posi lock differential and moser 31 spline axels, and BFGoodrich drag radials. All this is going in next week, I am wondering what kind of horsepower should I expect to see not counting the nitrous? Should I still run the nitrous on top of the supercharger on my stock engine since it is only an 80 shot or wait till I rebuild it next month? and What 1/4 times might I expect to see off the entire setup? Any help is greatly appreciated and thanks in advanced!
 
1

1ba96gt

New Member
Dec 10, 2002
181
0
0
Apr 28, 2004
#2
  • Apr 28, 2004
  • #2
A lot of things to consider. Like what type of supercharger, boost level, A/F ratio you are going to run, etc. I wouldn't run the nitrous on top. It would probably go for sure. For dyno, right now its sounds like you may be making about 195 rwhp area. If you run 14.56 lbs of boost you'll double your flywheel power. I am guessing you will only run about 10lbs, so with that and the other stuff it should be something like 320 rwhp. With that hp would could run any where from low 13's to high 11's. It just depends on your set-up.
 
F

funcrusher

New Member
Jul 24, 2002
27
0
0
Virginia
Apr 28, 2004
#3
  • Apr 28, 2004
  • #3
vortech S-trim
 
1

1ba96gt

New Member
Dec 10, 2002
181
0
0
Apr 29, 2004
#4
  • Apr 29, 2004
  • #4
With the S-Trim I would stay to the 320 guess. The last thing you want is high or unrealstic expectations. That kind of stuff is hard to guess on, too. It just gets you pissed off in the end, trust me I've done too many times.
 

i4power

Founding Member
Jan 11, 2002
1,083
0
0
Eglin AFB, Florida
Apr 29, 2004
#5
  • Apr 29, 2004
  • #5
I wanna say about 300hp, because you've still got the non-PI heads and intake manifold, which SUCK. I would recommend upgrading those first. After upgrading, I would say you'd be at about 350hp (at the crank).
 
You must log in or register to reply here.

Similar threads

F
88 Upgrade to 5 Lug/Disc Brake Conversion Confirmation of Plan
  • Firehawk335
  • Aug 10, 2020
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
10K
Fox 5.0 Mustang Tech Jan 28, 2021
derek1993
Drivetrain 33 spline SN axle with ABS and parking brake build
  • revhead347
  • May 12, 2020
  • 1994 - 1995 Specific Tech
Replies
2
Views
3K
1994 - 1995 Specific Tech May 12, 2020
revhead347
T
For Sale 2003 Built & turbo 2003 Mach 1 $9000 OBO - *Salvage Title* *Huge Mod list*
  • Turbo03Mach
  • Feb 5, 2021
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
5K
SN95 Mustangs For Sale (1994-04) Mar 6, 2021
MattMan02GT
M
B
New third member needed
  • blandq
  • Oct 14, 2018
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
910
1965 - 1973 Classic Mustangs -General/Talk- Oct 14, 2018
GT1966
Progress Thread Dirty Water Racing 89 Notch Project
  • ShedBuiltMS
  • Sep 29, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
64
Views
13K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2021
Flyboy60
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?