anyone have a picture of the Lentech OD delete switch?
- Thread starter bcmbcmbcm
- Start date
the switch is a standard toggle switch. nothing fancy. you can put any kind of switch you want to use. its a simple 2 post toggle like you would use for foglites or something like that.
The above is correct, but it is best to use one that has a small LED light built into the switch so at a glance, you will see that you have the OD locked out.
why does Lentech charge $50 for the wiring ?
The $50 is for the wiring items, which the switch is just part of. There is wiring to the vaslve body, a feed through connector that is installed in the transmission, the external wiring, connector, and panel mount switch.
I got the Strip Terminator transmission that has the connector already mounted in the housing. You can see it in the pictures here.
http://members.tccoa.com/392bird/lentech.htm
I got the Strip Terminator transmission that has the connector already mounted in the housing. You can see it in the pictures here.
http://members.tccoa.com/392bird/lentech.htm
the lite for the od delete is an excellent idea, nmever even crossed my mind. To drill the hole, you just have to remove the tranny pan. Best to do it while you are installing the valvebody. You can wire it up later, the trans functions like normal just no od.
