anyone have problems with aftermarket mufflers leaking around clamps?

J

jtthirdeye

Member

Apr 27, 2005

6

1

14

Jul 7, 2006

#1

• Jul 7, 2006

• #1

just bought a pair of mac mufflers for my 05 gt. though i love the sound, it's driving me nuts that i am leaking exhaust gasses around my clamps. anyone have any advice?

 

R

Rerun

Founding Member

Mar 31, 2002

312

0

16

South Bay, California

Jul 7, 2006

#2

• Jul 7, 2006

• #2

I have the MAC's as well, and noticed a few drops of condensation coming from around the clamp area a few days ago. I'm going to try getting a set of better clamps because the ones that came with the kit sucked ass.

A question for you. Are both of your pipes centered within the cut-outs of your bumper? The left one is off centered for me.

Cheers,
Justin.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Jul 7, 2006

#3

• Jul 7, 2006

• #3

tighten the clamps up a little more. my flows did the same thing, but i tightened them up a little more and no more leaks.

justin- if you cant get the mufflers centered by adjusting them at the inlet, try to loosen the clamps at the h pipe to over the axle pipe connection and adjust again. if that still does not work, you may need to bend the rods on the muffler for satisfactory fit.

 

R

Rerun

Founding Member

Mar 31, 2002

312

0

16

South Bay, California

Jul 7, 2006

#4

• Jul 7, 2006

• #4

bigcat said:

tighten the clamps up a little more. my flows did the same thing, but i tightened them up a little more and no more leaks.

justin- if you cant get the mufflers centered by adjusting them at the inlet, try to loosen the clamps at the h pipe to over the axle pipe connection and adjust again. if that still does not work, you may need to bend the rods on the muffler for satisfactory fit.

Click to expand...

Thanks bro, I'll give it a try this weekend.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Jul 7, 2006

#5

• Jul 7, 2006

• #5

these tips work for most. i hope you get the same results.

 

REDFIRE 05 GT

New Member

Nov 18, 2004

283

0

0

Junction City KS

Jul 7, 2006

#6

• Jul 7, 2006

• #6

The only problem I had with tightning them is tightning them to much, once you do that with standard round type clamps it dents the pipes together and thay are a bitch to get off.

 

GOLDENPONY

Founding Member

Jan 23, 2002

1,503

0

36

80

LOVELAND, OHIO

Jul 7, 2006

#7

• Jul 7, 2006

• #7

Clamps

The instructions that came with my CORSA's said to tighten them to 45 ft/lbs.
I did and I have no leaks.

 

66-&-06

New Member

Apr 30, 2006

10

0

0

Jul 8, 2006

#8

• Jul 8, 2006

• #8

The Corsa instructions also said to re-torque after driving the car a little while. I’ve had no leaks on mine either.

 

M

MATRIX4.6

Member

Nov 25, 2005

123

0

16

Jul 9, 2006

#9

• Jul 9, 2006

• #9

does leaking contribute to popping when reving? I have had the Ford Racing round body mufflers on for like 5000 miles already and ever since I put them on when I rev it in park they pop sometimes...