I have never installed a shifter before. I just bought one for my c4 transmission (B&M Megashifter). I have been told it's really easy. Can anyone confirm that? What am I in for?
Yep it is pretty easy. I don't know exactly about that kit... but I think all aftermarket shifters for autos are cable operated. You'll take of your neutral safety switch and your linkage and attach their peice to your shifting lever if that's what's it's called. Put on their bracket over the servo cover and the reest is striaght forward. that hardest part is adujsting the cable. Not really hard but can be frustrating getting up and down under the car. Get a nice clean peice of cardboard so you can slide in and out easily. Make sure it's adjusted perfect. Good Luck!!
Yep, very easy. Had on in my car before I did the 6 speed swap. I would recommend setting the neutral saftey switch and back up light switch BEFORE you ever get the shifter near the car. Use a continutiy meter or light and hook it up to the blades on the switch. With the shifter in P or N adjust the neutral safety switch until you have continuity. With the shifter in R adjust the back up light switch until you have continuity. Bolt in the shifter, bolt the braket to the trans, and adjust the cable.