anyone install in dash nav unit in GT ? need some help

2003gt

Member

Apr 27, 2003

290

0

16

Brandon, MS

Feb 26, 2007

#1

• Feb 26, 2007

• #1

i installed an eclipse 5435 and the install went great....only problem is that i can not hook up the speed sensor wire because ( i was told by a stereo installer local company) that my 05 mustang has something called a "CAN BUS" system and needs some really expensive adapter to be able to hook up the wire....


anyone have any solutions besides this, or where to get one cheaper and do yourself...

thanks

 

iskwezm

10 Year Member

May 24, 2005

4,159

20

79

Rowland Heights,California

Feb 26, 2007

#2

• Feb 26, 2007

• #2

the factory stereo harness has a grey/black wire that is the speed signal used for the speed sensitive volume. My nav unit didnt need to be tapped to a speed signal.

 

TicketMeRed05GT

Member

Dec 2, 2004

93

0

7

Cleveland, TN

Feb 27, 2007

#3

• Feb 27, 2007

• #3

Standing in front of the car....top plug on the PCM. Remove the cap on the top plug, it is the blue wire with yellow tracer on the left side. Tap into this wire for VSS. AVIC411.COM is the master for Pioneer units.

I have the Z1 in my GT and did not bother with the VSS. Use the NAV all the time, the VSS is not required on the Pioneer units.

http://forums.stangnet.com/showthread.php?t=673679

Good luck.

 

2003gt

Member

Apr 27, 2003

290

0

16

Brandon, MS

Feb 27, 2007

#4

• Feb 27, 2007

• #4

anyway you could take a picture of where your talking about ?

thanks for the help !!

 

TicketMeRed05GT

Member

Dec 2, 2004

93

0

7

Cleveland, TN

Feb 27, 2007

#5

• Feb 27, 2007

• #5

Did a Yahoo search and ran over this one....




regards,
TicketMeRed

 

Attachments

• VSSWire.webp

  52.7 KB · Views: 154