• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Anyone neeed anything!!!!!!??????

  • Thread starter Thread starter mytight95
  • Start date Start date Nov 20, 2005
  • 1
  • 2
  • 3
  • 4
  • 5
Next
1 of 5 Next Last

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Nov 20, 2005
#1
  • Nov 20, 2005
  • #1
Ok guys this weekend is a shop cleaning, started today..... got the new toolbox in order (craftsman...finally) and organizing tools etc.....and now it is time to remove all the clutter!

I still have a ton of parts laying around from the two cars i parted out, if anyone needs anything in particular, you can have it, i just am gonna throw away a lot of stuff,,,, ask me about what you need and if i have it, and am not using it myself it is yours..........if i have to ship, i will provide receipt for shipping if wanted just want this stuff gone...if you can help out with what i need in my parts list in the sig, that would be welcome also



jason



PS:
MODS>>>>>>> this isn't a for sale ad so i didn't put it in the classifieds, but if you feel the need to move it please do so and i apologize for clutter........
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Nov 20, 2005
#2
  • Nov 20, 2005
  • #2
I need an emergency brake cable. I think there is a short cable & 2 long cables. I know I definitely need the short one .......
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Nov 20, 2005
#3
  • Nov 20, 2005
  • #3
what all do you have? give us an idea
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Nov 20, 2005
#4
  • Nov 20, 2005
  • #4
Seventy Mach 1, i know i don't have the e-brake cables as them, airbaggs, and spindle were first to sell...

Matthiasj: lets see, two gas tanks, two decklids, rear bumper, misc. interior panels.....rear speaker cover, back seat, misc wire harness', defrost registers, defrost panel (winshield), seatbelts, upper rear quarter panels, 8.8 rearend(empty), pass. door hinges, man i don't know just a bunch of stuff that didn't move very fast.... my only other option is to take this to the swap meet coming up and trash the rest, but i was gonna give folks here a chance...... pass. side mach 460 door panel, accel coil, two fact coils, misc. FRPP wires blue, extra set of main caps for 302, 2 sets of e7 heads, rear trunk panels, extra spare tire........ i have a 2 story garage and it is getting full, time to get rid of some of this crap


i have more just cant remember, that is why i said post what you might need.



jason
 
9

95cobradude

Banned
Apr 1, 2005
194
0
0
long island, ny
Nov 20, 2005
#5
  • Nov 20, 2005
  • #5
man i had so much **** also, all the factory **** for my car and after awhile i figured the **** that wasn't going to sell just had to get trashed. it was under the deck and my parents wanted the **** out so i loaded up the trunk of my nissan and went to the goodyear after they closed and threw it in their dumpster, must have been a few hundred pounds of ****.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Nov 20, 2005
#6
  • Nov 20, 2005
  • #6
that is sooooo illegal around here, i would have to take it to the dump, and then pay them to throw it away, the city garbage serviec won't pick up stuff like this.....lol they charge an extra fee, and it is HIGH


jason
 

1slow95

Founding Member
May 16, 2002
1,797
3
48
ohio
Nov 20, 2005
#7
  • Nov 20, 2005
  • #7
mytight95 said:
....misc wire harness'....
Click to expand...

I need the diagnostic port connector....mine fell onto the headers and melted....Let me know if you have one.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Nov 20, 2005
#8
  • Nov 20, 2005
  • #8
the actually harness part or the little cover, i have the cover but not that harness. \

everyone keep trying, i am bound to have something someon needs,

i just remembered i have a power mirror, nice set of factory corner lights, one foglight, gauge bezel, two thermostat housings one powdercoated ford blue, a b7m t handle shifter knob, factory shifter, looks to be complete interior harness, taillight harness' one good black taillight, and more...............


jason
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Nov 20, 2005
#9
  • Nov 20, 2005
  • #9
how about an idler pulley?
 

TX MACH 1

New Member
Dec 20, 2002
64
0
0
Leander, TX
Nov 20, 2005
#10
  • Nov 20, 2005
  • #10
I am looking for this plug/grommet/cap. On a 94/95 It's under the carpet on passenger side on the boxed frame section (there is actually two of them there, I'm missing one). (pictured)

Also could use -
Passenger side Trunk liner section (hard/formed carpet wall)
The long metal clip that holds this section in at the back seat opening

Rear hard/formed carpet section that that goes across the back too under the trunk latch and covers the tail lamp wiring

Clean black dash/radio bezel
Clean clock
Clean shifter boot/bezel

rick@austinsvt.com
 

Attachments

  • DSC02681.webp
    61.1 KB · Views: 129

1slow95

Founding Member
May 16, 2002
1,797
3
48
ohio
Nov 20, 2005
#11
  • Nov 20, 2005
  • #11
mytight95 said:
the actually harness part or the little cover, i have the cover but not that harness.

jason
Click to expand...

I need both actually....Oh well, I might be able to find one at a jy around here.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Nov 20, 2005
#12
  • Nov 20, 2005
  • #12
mathias i have one old and one i paid 15$ for....... lemme know if you want apic .....


Tx Mach1, i have those grommets, the complete backseat anything needed and i have one of those that cover the tails....if you give me some pics to be sure i prolly have all that you listed.

Low5.0, sorry to have not been any help, and most yards won't sell just a certain part of a wiring harness, they will prolly want you to buy the whole thing
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 20, 2005
#13
  • Nov 20, 2005
  • #13
hmm, do you have the rear floormats in black? what about an a/c evaporator?

shotgun on the t-shifter handle!

what side tail light is it? if it's the passenger's side, i'll take it, too.

pm me or write me (paulg000@aol.com) for shipping. thanks, man.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Nov 20, 2005
#14
  • Nov 20, 2005
  • #14
no floormats, what does the evaporator look like, is it the canistero n the pass. firewall if so i have 2, not sure on the tail light, i will check when i go out to the shop later it is raining right now, and it is a good piece out back...


jason
 

TX MACH 1

New Member
Dec 20, 2002
64
0
0
Leander, TX
Nov 20, 2005
#15
  • Nov 20, 2005
  • #15
I need the passenger side version of the trunk wall/section pictured (plus those two clips seen there that hold it in place there at the back seat opening)
Also have a pic of the other section from the trunk I'm needing. (mine was cut up)

If you have them, what condition are they in? (Cracked/Stained)?
 

Attachments

  • DSC02700.webp
    81 KB · Views: 136
  • DSC02701.webp
    59.5 KB · Views: 129

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 20, 2005
#16
  • Nov 20, 2005
  • #16
the piece you're talking about is the canister--yeah, it's on the passenger's side firewall, but the piece i need is under the passenger's side dash. thanks, though.

so how much for shipping for the T shifter handle?

lemm eknow about that tail light. thanks.
 

Chin

New Member
Nov 29, 2004
39
0
0
Naperville
Nov 20, 2005
#17
  • Nov 20, 2005
  • #17
do you have carpet? if so what color?

could also use various interior parts.. seats, bezels, whatnot..

lemme know thanks
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Nov 20, 2005
#18
  • Nov 20, 2005
  • #18
i have all that stuff RAM, just get me a pic, and i will match the part with what you need...


jason
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Nov 20, 2005
#19
  • Nov 20, 2005
  • #19
mytight95 said:
i have all that stuff RAM, just get me a pic, and i will match the part with what you need...


jason
Click to expand...

well all i need is the passenger's side tail light and i want your T-shifter handle. how much for shipping? most importantly, i want the handle, lemme know, thanks.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Nov 20, 2005
#20
  • Nov 20, 2005
  • #20
they are in really nice condition overall TX, i have both of those pieces, i will get pics of them if you want... i don't have the clips though just the panels.... my car doesn't even have the clips.... where can you get them at.... do you have a better pic of how they attach etc.?


CHIN, you need to be more specific, bezels seats etc. just don't get it.....
jason
 
  • 1
  • 2
  • 3
  • 4
  • 5
Next
1 of 5 Next Last
You must log in or register to reply here.

Similar threads

P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
908
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
Does anyone know where to buy this
  • PvolkStang
  • Jul 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
269
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 20, 2025
manicmechanic007
W
FoxBody Gauge Cluster - What would you pay?
  • wildstang17
  • Jun 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
261
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 26, 2025
Mustang5L5
Any 1 find any decent blackfriday sales for Foxbody or car stuff?
  • rednotch
  • Nov 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
731
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 19, 2025
rednotch
S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
687
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?