Anyone who uses a phenolic spacer!

I use a 1/2 inch spacer but I took off all my egr valve stuff. And I use P heads as well. maybe you can take the egr stuff off as well?

I have Trickflow R intake with a 1" spacer. So i just took off the EGR pipe. But you could go to a plumbing store and get a custom fit copper pipe or something to use instead.

Will

I am going to be installing a spacer shortly, what do I need to do to take the EGR stuff off, just take it off the car? We don't have emissions or anything of the like here so I don't need to worry about that.

BTW- did any of you guys running a spacer have trouble with hood clearance?

red94fiveo said:

I am going to be installing a spacer shortly, what do I need to do to take the EGR stuff off, just take it off the car? We don't have emissions or anything of the like here so I don't need to worry about that.

BTW- did any of you guys running a spacer have trouble with hood clearance?

Click to expand...

I have a 3" Cobra R hood, so no problems here

They make a nut that you can put onto the EGR tube that extends it a bit. It's made for your situation. I bought one several weeks ago that I didnt used cuz I broke my tube and just decided to delete it instead. If you are interested in it let me know.

Also, I used a 3/8" spacer on my GT40 intake and it just touches the liner. Anything larger and it might would have issues closing. There is a slight imprint of the upper corner on it now.

Also, I have a CEL on relating to the EGR that I deleted. I still have it hooked up but I plugged it with pennys on both ends. Must you get a tuning device/chip in order to get rid of it?

Chris