• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

Anyone with a centri blower used/using a Brenspeed Tune?

  • Thread starter Thread starter Undisputed
  • Start date Start date Apr 27, 2010

Undisputed

New Member
Dec 4, 2009
306
0
0
Westchester County NY
Apr 27, 2010
#1
  • Apr 27, 2010
  • #1
Anyone with a centri blower used a Brenspeed Tune? They estimated a 50RWHP gain over the Vortech 91 octane emissions safe super conservative tune, still 100% safe, 93 pump-gas… I have heard nothing but good about tunes and customer service from them, the only bad thing I have heard is the never-ending debate over how efficient/non-efficient or safe/unsafe the V3 NON-INTERCOOLED kit is, and I still think if you’re in a climate that sees 70+ degrees on an everyday basis and the car is “driven” the intercooled kit is much more efficient and will keep the IAT’s down consistently.. I have driven my car hard all day in 75+ degree temp and popped the hood and touched the blower (hot as fu*k) and touched the top off the intercooler that feeds into the throttle-body and was amazed at the HUGE difference in temps!! BUT, ANYWAY, HAS ANYONE USED A BRENSPEED TUNE W/ A V3 HO INTERCOOLED KIT? I HAVE TUNED EQUAL LENGTH BBK’S, CATLESS O/R X-PIPE AND CUSTOM MADE 2 ½” STRAIGHT THROUGH MUFFLERS… DOES 450+ RWHP SOUND ABOUT RIGHT W/ THESE MODS & THE 3.60 PULLEY (V-POWER PULLEY) Thanks for any and all input!!
 

Undisputed

New Member
Dec 4, 2009
306
0
0
Westchester County NY
Apr 27, 2010
#2
  • Apr 27, 2010
  • #2
Or, did anyone buy a V3 HO from Vortech, as they say with their tune, and the Kenne Bell Boost-a-pump, brisk spark plugs and IAT relocation kit that the V3 HO kit is 100% safe 93 octane pump gas, and will be over 450 RWHP w/ the stock V3 HO kit pulley... 450+ RWHP on pump gas should make the car even more fun than it is now..haha
 

davisr014

New Member
Apr 19, 2003
33
0
0
Honolulu
May 1, 2010
#3
  • May 1, 2010
  • #3
I do not have the Vortech, but I am running their tune with the Eforce and love it. Their customer service is great.
 

bynumj

Member
May 21, 2007
77
2
6
Portland
May 1, 2010
#4
  • May 1, 2010
  • #4
I am running the non-cooled kit from brenspeed, however, I have not had the car on a dyno. I will say it is the best money I have spent on the car. I am going to have my wideband working tomorrow, so I will be able to see how the AF ratio looks. Also, I can only get 92 oct here. I am very pleased with the kit and would tell say to anyone that it is a great bang for the buck.
 
You must log in or register to reply here.

Similar threads

Forced Induction Normal intake temps for supercharger??
  • Kid wita 5oh
  • Jun 16, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
963
Fox 5.0 Mustang Tech Jun 16, 2024
Kid wita 5oh
ACT sensor in plastic charge pipe
  • 92Rustang
  • Jul 23, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 31, 2024
92Rustang
For Sale 2004 Mustang GT w/ Vortech Ti Trim
  • 50Dreamer
  • Oct 28, 2023
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
2K
SN95 Mustangs For Sale (1994-04) Oct 28, 2023
50Dreamer
H
'86 New Turbo Build First Start/Idle Trouble. Full Tune specs attached
  • Heffay
  • Jul 10, 2022
  • Digital Self-tuning Forum
Replies
8
Views
3K
Digital Self-tuning Forum Jul 12, 2022
Heffay
H
Engine 347 Supercharge Planning
  • HeatShield
  • Oct 17, 2020
  • Fox 5.0 Mustang Tech
Replies
1
Views
3K
Fox 5.0 Mustang Tech Apr 27, 2021
Haste347
H
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?