• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

AOD Rebuild

  • Thread starter Thread starter lgbnaf7
  • Start date Start date Dec 4, 2007
L

lgbnaf7

New Member
May 6, 2005
61
0
0
Tacoma Wa
Dec 4, 2007
#1
  • Dec 4, 2007
  • #1
I have a AOD out of a 89 GT sitting in my garage. I was thinking about getting it rebuilt. I want to get it rebuilt but also made a little more beefier. I know about the better torque converter. I also heard I should look into a shift kit. What else should I look far when having a beefier transmission built?
 
F

Fox8950

Member
Jun 29, 2007
247
2
18
Dec 4, 2007
#2
  • Dec 4, 2007
  • #2
Heres a couple things you can check out that should give ya a pretty good direction.
http://www.lincolnsonline.com/tech/00080.html has a TON of info about what you want and the guys over at http://www.clickclickracing.com/ are good AOD guys and more than willing to answer any questions you'd have.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Dec 4, 2007
#3
  • Dec 4, 2007
  • #3
Get a basic rebuild with good clutches and bands (Alto Reds are pretty good) and a TransGO Shift Improver kit you will also want to up your convertor to around a 2,000 or 2,400 this seems to help an AOD out. And last but not least get a good quality fluid and a tranny cooler that is external and around 12,000 gvw sized this will make you a good tough AOD.
 

baldy1

New Member
May 5, 2005
124
0
0
Portsmouth Va
Dec 4, 2007
#4
  • Dec 4, 2007
  • #4
Use the 4r70w gear train. The stamped steel direct drum. Get a hardened imput shaft. get a good converter from precision.Get some good clutches. Raybestos are good. Not sure if they have the z pack for the AOD yet. They are great clutches. Good luck. Clean the VB real good because they do give you a fit after rebuild if not cleaned properly
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
328
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
A
Drivetrain 91 AOD linkage at transmission
  • alchemist1
  • Sep 29, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
459
Fox 5.0 Mustang Tech Sep 29, 2025
JD1964
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Salvage/rebuilt title question
  • djj62478
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
216
1996 - 2004 SN95 Mustang -General/Talk- Oct 2, 2026
DadLife0724
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
891
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?