AOD to TKO swap car wont start

[90' LX 5.0]

So we got the bellhousing and new headers in and the old shifter is out of the car. Before we took the shifter and stuff out the car started fine with the new pedal assembly in.

The car will start if i jump the solenoid.

Any ideas? Is it just a bad solenoid or is there something we took out with the aod or something that needs to be hooked up to the tko?

 

[66stangbluework]

i would guess something with the neutral safety switch?

 

[Sicarius428]

I second that.
Kevin

 

[ryan218]

have you hooked up the new netural saftey switch?

 

[SVT32VDOHC]

Yeah, there are three plugs that go int othe clutch pedal box assy. The one over the clutch pedal is the neutral safety switch which allows the car to start only when the clutch is pushed in.

 

[90' LX 5.0]

have you hooked up the new netural saftey switch?

The neutral safety switch on the pedals is hooked up. And after i completed the pedal assembly swap the car started fine(with the clutch pedal depressed) but the auto and the auto shifter were all still hooked up. with the exception of the auto shifter lockout assembly which wasnt hooked up on the column or plugged in to its connection.

 

[jrichker]

Diagram courtesy of Tmoss & Stang&2birds

See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/

http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

 

[90' LX 5.0]

So is there a plug that needs to connect to the tranny for the car to start with the Pedal assembly in place and the Automatic tranny out?

 

[90' LX 5.0]

Ok so i dragged the AOD back under the car and connected the 5 prong plug(4 wires) under the car back to the tranny. Moved the gear selector on the tranny and found neutral or park (dont know which) and the car started right up. (the clutch pedal has to be pushed in) So what exactly do i need to do to rememdy this problem? thanks

 

[90' LX 5.0]

any ideas?

 

[90' LX 5.0]

Im still lost here. I can see the difference in that diagram from the AOD and the 5 speed wiring. But what do i need to do to make that circuit closed at all times?