AOD Torque Converter

cwdunnet · Jan 10, 2006

i have an aod in my 87 mustang, and i was wondering because i don't want to go to the hassle of puttin a t-5 in if a toruqe converter will give me some more torque down below. and also when it says about lock-up n non lock-up i am not sure which one i need, and about the bolt circle, some say 9.5" some say 11.5" some say 12", i was told this is a good one, Ford AOD B&M 2400 Holeshot street, but i would like some input about this..thank you.

willys1 · Jan 10, 2006

cwdunnet said:
i have an aod in my 87 mustang, and i was wondering because i don't want to go to the hassle of puttin a t-5 in if a toruqe converter will give me some more torque down below. and also when it says about lock-up n non lock-up i am not sure which one i need, and about the bolt circle, some say 9.5" some say 11.5" some say 12", i was told this is a good one, Ford AOD B&M 2400 Holeshot street, but i would like some input about this..thank you.

NO!! stay away from B&M converters I put a conv in my car when I still had the stock gears and WOW!! Turned it into a different car
That +Gears+ a shift kit will make it just as,if not faster then a 5spd!!
Precision Industries makes the best conv foe 5.0's but there 700 beans..Edge conv are really good to and are around 4-500...BUT,if you get a conv.,a tranny cooler is a must!!! Or you will burn out your tranny!! There only 75 bucks.

timewarped1972 · Jan 10, 2006

yeah i have heard b&m's aren't the greatest converters for aod's which i don't know why when thats half their business.but i have heard that....no personal experience though....

you want a lock up converter, for a street car...the lock up locks 3rd gear in, other wise it will slip more, and with a higher stall and a street car thats not good...........from what most say you want 2600 and up stall, seems like alot of guys run the 3000 stall, which is why you'd want a lock up converter and a bigger tranny cooler on the street

willys1 · Jan 10, 2006

If you have the stock cam,3000stall for the Edge,and 2400 with the Precision Industries.I have a 2800 and its a little too big..The lock up makes it run cooler!!

davs5.0 · Jan 10, 2006

Just stay away from the B&M. Decent price but you can get a much better converter from www.edgeracingconverters.com or Precision Industries. The price will probably determine your choice but Edge's stuff is great in my opinion. The different diameters of stalls reduce their mass and will spool up faster but hold less fluid so they will heat up more. Trans cooler is a must with ANY aod car for added insurance.
Don't even concern yourself with the non lockup stall unless you plan on doing alot of drag racing and not much street driving. Lockup is what you've got now and unless you plan on changing your input shaft in the trans, stick with the lockup.

luckythirteen13 · Jan 11, 2006

i plan to go with an edge racing 3200 lock up. give them a call, they can explain a lot

cwdunnet · Jan 11, 2006

so look slike ima go with a 3000 street edge converter, so i will go with the lock up? and i think they 9.5" so thats good . just that i no im loosing a lot of power with the transmission i got..its like dead of start off it doesn't even wanna spin off dead stop..but its got power up top. its a rebuilt transmission with shift kit, aluminum driveshaft and 3:73 gears, and the motor makes good horsepower no reason why i shouldn't burn the tires off, only thing i can think of is the torque converter.

willys1 · Jan 11, 2006

cwdunnet said:
so look slike ima go with a 3000 street edge converter, so i will go with the lock up? and i think they 9.5" so thats good . just that i no im loosing a lot of power with the transmission i got..its like dead of start off it doesn't even wanna spin off dead stop..but its got power up top. its a rebuilt transmission with shift kit, aluminum driveshaft and 3:73 gears, and the motor makes good horsepower no reason why i shouldn't burn the tires off, only thing i can think of is the torque converter.

If you dont have DR's traction is gonna become a "major" issue off the line When you punch it off the line the tires are just gonna smoke!! Yeah,you want the lock up But dont forget,,install a tranny cooler at the same time or it will burn up your aod!!

$uperstang · Jan 12, 2006

Call Andre at EDGE RACING!!!!!

FordGuy88 · Jan 12, 2006

Go with a TCI Street Fighter converter. They have good sall and they are pretty cheap. TCI makes good **** too.

RdRunnr · Jan 15, 2006

don't get anything off the shelf. With a converter you get what you pay for. Go with a custom Edge or PI Stallion and you will be very happy.

AOD Torque Converter

cwdunnet

New Member

willys1

Active Member

timewarped1972

Member

willys1

Active Member

davs5.0

luckythirteen13

New Member

cwdunnet

New Member

willys1

Active Member

$uperstang

New Member

FordGuy88

New Member

RdRunnr

Similar threads

AOD Torque Converter

New Member

Active Member

Member

Active Member

New Member

New Member

Active Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency