• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

AOD Transmission Info

  • Thread starter Thread starter 5.0_Junkie
  • Start date Start date Jul 21, 2005

5.0_Junkie

New Member
Nov 6, 2003
21
0
2
Speed Capital of the World, Indiana!
Jul 21, 2005
#1
  • Jul 21, 2005
  • #1
Well guys I had some wacky AOD problems this week.

The AOD tranny was shifting early on from 2-3. Which I figured might mean it was time to drop the pan and change filter and oil. But on the way home when I hit the gas it acted like I had suddenly put a 3500 stall converter in the car. I thought something is definitely wrong and its time to go to a 5 speed! I limped it home, changed the tranny fluid and filter, drained the torque converter and still no change. In the driveway it would not go in to gear at all now. I had ran out of fluid so the next day went and got 3 more quarts of fluid because it was still low. While the engine was idling I noticed this cable not attached to the throttle body, guess what it was the T.V. cable....no fluid line pressure to the tranny with out that. The freaking plastic grommet must of cracked and fallen off while I was driving it, nothing was left in the hole next the throttle cable. Bought a new grommet last night so it should be ok. I guess trany's don't last very long with out that hooked up. The guy at the Ford dealer told me 6 miles is usually about it. So I guess I got lucky hopefully! The fluid was pretty clean and no chunks so I think it will be OK. I am glad Ford decided to make that piece out of plastic so the header heat will eventually crack it!!! And guess what the Ford dealer stock those because they break or crack quite a bit! Interesting Huh! So be warned if this grommet breaks your tranny could be dead.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Jul 21, 2005
#2
  • Jul 21, 2005
  • #2
I think the hairpin grommet dealie was redesigned in metal to address this.

Good luck.
 
J

jimilane

Founding Member
Aug 20, 2001
158
0
17
Raleigh, N.C.
Jul 21, 2005
#3
  • Jul 21, 2005
  • #3
Yep, there is a metal replacement.

I got mine at the ford shop. Not the parts counter, but from a mechanic. Everyone seems to have a few in their tool box.
 

Ourobos

Member
Apr 12, 2004
260
1
17
Jul 21, 2005
#4
  • Jul 21, 2005
  • #4
So is it FRIED?
 
You must log in or register to reply here.

Similar threads

A
Drivetrain 91 AOD linkage at transmission
  • alchemist1
  • Sep 29, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
290
Fox 5.0 Mustang Tech Sep 29, 2025
JD1964
C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
166
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
354
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
AOD TV linkage
  • Titanium90
  • Jun 10, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
266
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2025
KRUISR
S
Need help asap
  • shaggyman65
  • Dec 24, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
243
1996 - 2004 SN95 Mustang -General/Talk- Dec 24, 2025
shaggyman65
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?