• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Are my trap speed times low or is it just me?

  • Thread starter Thread starter 99redgt
  • Start date Start date Feb 16, 2004
9

99redgt

New Member
Jun 6, 2003
105
0
0
western oklahoma
Feb 16, 2004
#1
  • Feb 16, 2004
  • #1
I went to the track on sunday and ran a new best time of 13.8 @ 98 mph is this kind of low mile an hour or is it me. My sixty foot was 1.9. What do you guys think. Here are my mods:
3.73 gears
80mm mass air
dragon upper plenum
70mm tb
steeda pullies & t/a-only set at 12 degrees
nitto drags
steeda tri-ax
bbk o/r x pipe w/flowmaster mufflers.
 

BMan5150

Founding Member
Feb 19, 2002
309
0
16
Columbus, OH
Feb 16, 2004
#2
  • Feb 16, 2004
  • #2
They aren't low - you are just really hooking well with those Nitto DRs. That wil scrub a little time off of your MPH and your ET!
 

mogs01gt

Founding Member
Jul 22, 2002
3,113
30
119
Ohio
Feb 16, 2004
#3
  • Feb 16, 2004
  • #3
well that is a tad slow, what were the temps like?
 
9

99redgt

New Member
Jun 6, 2003
105
0
0
western oklahoma
Feb 16, 2004
#4
  • Feb 16, 2004
  • #4
around 45 degrees. I am in central Oklahoma at Thunder Valley in Noble.
 

01BlkGT

Founding Member
Jan 22, 2002
1,015
0
36
ATX
Feb 16, 2004
#5
  • Feb 16, 2004
  • #5
I'd think with the mods you have you'd at least me in the 100mph range. Do you happen to know the elevation of the track?
 
9

99redgt

New Member
Jun 6, 2003
105
0
0
western oklahoma
Feb 16, 2004
#6
  • Feb 16, 2004
  • #6
I think it is like 1250 above sea level or something like that.
 
B

BlkDragon

New Member
Sep 7, 2003
162
0
0
St. Louis
Feb 16, 2004
#7
  • Feb 16, 2004
  • #7
You are a touch low. W/ those mods yous should dyno around 260 and should be in the low 100's.
 
R

Roush21

New Member
Dec 31, 2003
348
0
0
Feb 16, 2004
#8
  • Feb 16, 2004
  • #8
99redgt said:
I went to the track on sunday and ran a new best time of 13.8 @ 98 mph is this kind of low mile an hour or is it me. My sixty foot was 1.9. What do you guys think. Here are my mods:
3.73 gears
80mm mass air
dragon upper plenum
70mm tb
steeda pullies & t/a-only set at 12 degrees
nitto drags
steeda tri-ax
bbk o/r x pipe w/flowmaster mufflers.
Click to expand...


With my old 96 cobra w/ 4.10s and about the same mods as you also w/ the Nitto DR's my best quarter miles time was 13.64 shifting was done at a low 5800 rpm's and the mph for that run was 101. The fasts mph run was 103 on a 13.7 run.
 
You must log in or register to reply here.

Similar threads

Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
SOLD 1993 Mustang Cobra / 114K miles / Modified / Fort Lauderdale, Florida.
  • Naja
  • Oct 4, 2023
  • Fox Body Mustangs For Sale (1979-93)
Replies
5
Views
12K
Fox Body Mustangs For Sale (1979-93) Feb 26, 2025
Naja
A
1991 5.0 with HCI - started car, running for a few minutes, started pushing coolant into the overflow tank and then puking out from there. I'm lost
  • AmericanMuscle4.6GT
  • Oct 16, 2022
  • Fox 5.0 Mustang Tech
Replies
6
Views
4K
Fox 5.0 Mustang Tech Nov 30, 2022
CAMTWO1070
A
1991 5.0 - fires up every time, idles perfectly, but once it’s warm it won’t idle for more than 15 seconds
  • AmericanMuscle4.6GT
  • Jul 27, 2021
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
48
Views
8K
Fox 5.0 Mustang Tech May 21, 2022
Mindseye007
A
Progress Thread alwayshi 00 GT supercharged build
  • alwayshi
  • Nov 7, 2019
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
26
Views
8K
1996 - 2004 SN95 Mustang -General/Talk- Aug 9, 2020
Deleted member 38176
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?