Are These Flywheels Usable Or Scrap?

Hi Guys, the flywheel with the stripped threads, could have been repaired in ten minutes or less with a Helicoil, and wouldn't affect the balance. Does require a helicoil tap. I've done it many times on car parts to gun parts. Would have been faster than unbolting it from the crank. Is especially good on aluminum parts as, makes a lot stronger threads than just re-tapping and goes back to the original size.. In the machine shop, many times they require helicoils in all tapped holes when making new aluminum parts, just so they won't strip out, just a heads-up for next time.
 
It looks like the Ford racing flywheel can be had for $140 at American muscle.
At that price its just not sensible to pay to have it resurfaced. To me, they are scrap, I'm the type of person that doesn't want to go though all the work of pulling a trans and using an old part to save $100
 
I ended up keeping the one that already was resurfaced and just needs a single helicoil. I'll never use it, but who knows if I'll need it for a mockup or something else.

The rusty old one went on the woodpile. When I get enough steel/AL, I just set it out on the curb and some random person usually grabs in within 24 hrs.