autolite 23'S spark problem

lilnoee

New Member
Dec 4, 2007
8
0
0
I have a 91 LX, with a paxton supercharger (8#) and GT40 heads. I bought some autolite 23's plugs for it and gapped them to .035. I seem to be running really rich now and have horrible cold starts. The plugs that were in there before were motorcraft and were gapped at .051, but i was told that the autolite 23's were a better application for what I have. Does anybody have any ideas what gap i should bring it to?
 
Well typically you want to run a smaller gap to prevent the boost from blowing out the spark. 0.035" is typically what most supercharged guys run.

Did the problems start right after the plug change?
 
The plug gap is only part of the problem. That is a 2 step colder plug. I use the 23's with nitrous...and it did the same thing...real long warmup time before it works well. Try a 24, but take the timing down 1 deg, and listen for detonation.

.35 works well for supercharged applications. Anything over .40 on my lightning would get blown out.