Autometer Air Fuel Gauge Tap In - Where to Connect>>>

oh yeah, there not hard to hook up once you find the wire. I just spliced mine right on using one of them red connector thingys, then the other is a ground..
 
Hey Darren,fellow gtamc member here. :D
Dig out your stangs computor,and follow these simple instructions.I put one in my '03 last year.It's very simple.
Look for pin number 87 at PCM, red w/black stripe or look for pin number 60, gray w/light blue stripe.Just choose one of those two wires/pin numbers to hook up too. :nice:

:canada: :cheers:
 
1low03gt said:
Hey Darren,fellow gtamc member here. :D
Dig out your stangs computor,and follow these simple instructions.I put one in my '03 last year.It's very simple.
Look for pin number 87 at PCM, red w/black stripe or look for pin number 60, gray w/light blue stripe.Just choose one of those two wires/pin numbers to hook up too. :nice:

:canada: :cheers:


Sorry this is really old, i just have to dig it up to say-
1low03, this really was the most helpful thing to me yesterday when installing my autometer lunar a/f gauge. I had the schematic but i wasnt sure which of the two wires was hot- I went with the 87 red/black wire, and the other wire to that o2 sensor was hot im assuming (since the red/black is the signal). this saved me alot of time- thanks alot. Other gauges going in today--- pics :)