• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Autometer gauge's question

  • Thread starter Thread starter bigcahoona
  • Start date Start date Jun 21, 2006

bigcahoona

Member
Apr 11, 2005
74
0
6
Chi Town
Jun 21, 2006
#1
  • Jun 21, 2006
  • #1
I just installed my oil pressure, water temp and volt gauges into the pod. I bridged the 12v wiring for the lights into one wire and added a 5 amp fuse at the end. I bridged - wiring into one and grounded. Same with ign wires, into one with a 5 amp fuse at the end, ground to ground. Sender's I know where they go. My question is where's the best place to tap into the lights and where to tap into the ign for a clean and solid hookup.
 

89Notch

Founding Member
Oct 21, 1999
1,669
0
0
MSU
Jun 21, 2006
#2
  • Jun 21, 2006
  • #2
bigcahoona said:
I just installed my oil pressure, water temp and volt gauges into the pod. I bridged the 12v wiring for the lights into one wire and added a 5 amp fuse at the end. I bridged - wiring into one and grounded. Same with ign wires, into one with a 5 amp fuse at the end, ground to ground. Sender's I know where they go. My question is where's the best place to tap into the lights and where to tap into the ign for a clean and solid hookup.
Click to expand...


Fuse box, you can get an electrical piece that wraps around the fuse and steals power.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jun 21, 2006
#3
  • Jun 21, 2006
  • #3
Dimmer switch for my gauges so the lights are controlled by the riostat on the dash. My gauges are mounted under the radio so I was able to tap into the dimmer wire for the factory radio.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 21, 2006
#4
  • Jun 21, 2006
  • #4
i took my dash pad off and tapped into the light power going to my heater controls. That way the lights come on when i pull on the lights and as srothfuss says it will dim like the rest of the lights in the interior.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 21, 2006
#5
  • Jun 21, 2006
  • #5
If using a pillar pod, grabbing the dimmer lighting source at the headlight switch is clean. Otherwise, as mentioned, fuse 13 works well (you could tap at the back of the fusebox for a cleaner aesthetic).

Good luck.
 

bigcahoona

Member
Apr 11, 2005
74
0
6
Chi Town
Jun 21, 2006
#6
  • Jun 21, 2006
  • #6
Now I have alot to try.
Thank's
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jun 21, 2006
#7
  • Jun 21, 2006
  • #7
I used the fog light fuse.....But when I pudh my high beams on the tach light's go out lol
 
You must log in or register to reply here.

Similar threads

C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
253
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
198
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
G
Electrical Getting good ground in 1991 Fox Vert for amps - getting popping noise when I turn on the lights?
  • gvanginkel403
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
880
Fox 5.0 Mustang Tech Jul 21, 2026
gvanginkel403
G
J
Fox Lost all gauge cluster function after Holley Terminator X install (solved)
  • Justin17383
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
278
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2026
2000xp8
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
269
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?