• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Bad Alignment

  • Thread starter Thread starter savegoodautonfg
  • Start date Start date Apr 22, 2007
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Apr 22, 2007
#1
  • Apr 22, 2007
  • #1
I got my alignment done about 4 months ago, when i went there during the alignment the guy said i dont know how good the alignment is going to be because it looks to me as if you need new inner tie rod ends and some bushing he said. i forget what bushing it was though. Could needing new ones of these things listed above, cause a bad alignment and my passenger side front tire is loosing thread really bad on the inner part of it not loosing thread evenly like it should?

any idea's guys?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Apr 22, 2007
#2
  • Apr 22, 2007
  • #2
I wouldn't even bother doing an alighnment if you had loose tie rod ends..
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 23, 2007
#3
  • Apr 23, 2007
  • #3
Roland69 said:
I wouldn't even bother doing an alighnment if you had loose tie rod ends..
Click to expand...

and neither would i.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Apr 23, 2007
#4
  • Apr 23, 2007
  • #4
Well ok i wish i didn't now but can you help me with the question i asked
 
K

kevin2m4

New Member
Mar 16, 2004
50
0
0
Barrie Ontario Canada
Apr 23, 2007
#5
  • Apr 23, 2007
  • #5
the answer is yes, youre losing tread there becasue one wheel is striaght the other isnt
 
K

kevin2m4

New Member
Mar 16, 2004
50
0
0
Barrie Ontario Canada
Apr 23, 2007
#6
  • Apr 23, 2007
  • #6
which is caused by having worn components that made the alignment bad
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Apr 23, 2007
#7
  • Apr 23, 2007
  • #7
ROCK AUTO.com
which one of these do i want?



1990 FORD MUSTANG GT 5.0L 302cid V8 MFI (E) : Steering : Rack and Pinion Complete Unit
ItemPriceCoreTotal
CV UNLIMITED Part # RP260
Complete unit, Reman., Power Steering, w/ 3,0 turns lock to lock

$65.79$22.50$88.29

CV UNLIMITED Part # RP260HD
Complete unit, Reman., Power Steering, w/ 2.5 turns lock to lock

$65.79$22.50$88.29

A-1 CARDONE Part # 22203A {[Rack & Pinion] Complete Unit; Reman.}
Power Steering; w/o Performance Suspension (Ford Gear) w/2 Piece Mounting Bushings

$73.79$30.00$103.79

A-1 CARDONE Part # 22203F {[Rack & Pinion] Complete Unit; Reman.}
Power Steering; w/o Performance Suspension (Ford Gear) w/1 Piece Mounting Bushing

$73.79$30.00$103.79

A-1 CARDONE Part # 22203T {[Rack & Pinion] Complete Unit; Reman.}
Power Steering; w/o Performance Suspension (TRW Gear)

$73.79$30.00$103.79

A-1 CARDONE Part # 22207 {[Rack & Pinion] Complete Unit; Reman.}
Power Steering; w/Performance Suspension

$73.79$30.00$103.79

APSCO Part # 3622 {Remanufactured}
standard suspension - 45 1/4 OAL - 3 Turns

$81.79$50.00$131.79

ACDELCO Part # 3618450 {replaces 36-9113 #26064360}
GEAR,STRG (REMAN-RACK & PINION-POWER COMPLETE) LOW RATIO STG, 2-1/2 TURNS LOCK TO LOCK AT STG. WHL.& HOUSING MARKED SPR-BS SPR-CT SPR-EV

$94.79$40.00$134.79

ACDELCO Part # 3618429 {#88991132}
GEAR,STRG (REMAN-RACK & PINION-POWER COMPLETE) STD. RATIO STG, 3 TURNS LOCK TO LOCK AT STG. WHL. & HOUSING MARKED SPR-CM SPR-CR
* Non-stock item--shipping delayed up to 12 business days *

$83.89$55.00$138.89
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 23, 2007
#8
  • Apr 23, 2007
  • #8
why would you be replacing the steering rack if only bushings?
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 23, 2007
#9
  • Apr 23, 2007
  • #9
savegoodautonfg said:
I got my alignment done about 4 months ago, when i went there during the alignment the guy said i dont know how good the alignment is going to be because it looks to me as if you need new inner tie rod ends and some bushing he said. i forget what bushing it was though. Could needing new ones of these things listed above, cause a bad alignment and my passenger side front tire is loosing thread really bad on the inner part of it not loosing thread evenly like it should?

any idea's guys?
Click to expand...


usually they write down what’s wrong on the tag and give you a estimate of the cost for the repairs. but if you don’t have that tag and you just had this done only 4 months ago why not call the place that did the work and tell them that you’d like to get your front end fix, [not that they’re fixing it] but you can’t remember the cost was and what repairs need to do done.

it could be control arm bushings, or even sway bar arm link bushings, or ball joints.

This might help
http://www.allfordmustangs.com/Detailed/52.shtml
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Apr 23, 2007
#10
  • Apr 23, 2007
  • #10
4G-KDMP said:
usually they write down what’s wrong on the tag and give you a estimate of the cost for the repairs. but if you don’t have that tag and you just had this done only 4 months ago why not call the place that did the work and tell them that you’d like to get your front end fix, [not that they’re fixing it] but you can’t remember the cost was and what repairs need to do done.

it could be control arm bushings, or even sway bar arm link bushings, or ball joints.

This might help
http://www.allfordmustangs.com/Detailed/52.shtml
Click to expand...

The reason i want to get the rack and pinion unit replaced is beacuse he said i needed new inner tie rod ends which right there in like at least 50 for both.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Apr 23, 2007
#11
  • Apr 23, 2007
  • #11
Can you tell by looking at the bushings if they are shot or not?
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 23, 2007
#12
  • Apr 23, 2007
  • #12
if you see dry rot or deep cracks in the bushing that's a good indication that there not doing there job for starters, or if you can grab and your able twist them then there definitely shot. if you take a wrench just big enough to slide over edge of control arms and push or pull and they move there probable shot also.
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 23, 2007
#13
  • Apr 23, 2007
  • #13
dbl post
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Apr 23, 2007
#14
  • Apr 23, 2007
  • #14
now what rack and pinion do i need?

i know performance rack right?

but what about TRW/Ford and 1/2 Piece Bushings?
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 23, 2007
#15
  • Apr 23, 2007
  • #15
i'd do a search and see what others recommend.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Apr 23, 2007
#16
  • Apr 23, 2007
  • #16
A-1 CARDONE Part # 22207 More Info {[Rack & Pinion] Complete Unit; Reman.}
Power Steering; w/Performance Suspension

My dad is the manager at an auto parts store and he can get me this one for $47.00

what do you think?
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 23, 2007
#17
  • Apr 23, 2007
  • #17
if my dad were the manager of an auto parts store , i'd trust his judgement over just about anyone else's.
 

Nibbie

New Member
Mar 10, 2007
127
0
0
Apr 23, 2007
#18
  • Apr 23, 2007
  • #18
what way is the tire wearing? it could also be caster/camber on the front, to do that for the rear considering its a solid axle a tech would need to install shims, you would need to get the correct parts so when the alignment is performed they can get the correct toe/caster/camber readings for the front end. Does it pull in any direction? somtimes adjusting the camber or caster will fix the problem if they can adjust it far enough, if they can they you could use a set of caster/camber plates for even more adjustability. hope this helps
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Apr 23, 2007
#19
  • Apr 23, 2007
  • #19
if you get under the car the tire closest to under the car rather then on the outside toward the road/pavement etc..

if you understand, i hope you do.
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 23, 2007
#20
  • Apr 23, 2007
  • #20
if your wearing out the inside edge of the tire that's negative camber.
if your wearing out the outsde edge of the tire that's postive camber.

unless the tires are toed out and that will also wear out the inside egde of the tire also.
or toed in and that will wear ot the outside edge of the tire.
 
You must log in or register to reply here.

Similar threads

J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
342
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
213
Fox 5.0 Mustang Tech Tuesday at 10:26 PM
AeroCoupe
Foxbody adjust alignment
  • Creomod
  • Jun 7, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 14, 2025
2000xp8
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
L
Electrical problems with passenger side downstream o2 sensor
  • Lexiii12
  • Sep 14, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
161
2005 - 2014 S-197 Mustang -General/Talk- Sep 14, 2026
Lexiii12
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?