• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

BAD HEAD GASKET?

  • Thread starter Thread starter mustang90
  • Start date Start date Apr 13, 2004

mustang90

Founding Member
Feb 8, 2001
1,209
15
58
Apr 13, 2004
#1
  • Apr 13, 2004
  • #1
Mycar will run great until it warms up, then it will hesitate and buck resulting in the rpms going wild and I will have to pull over to let the car cool down. After it cools, the car will run great till it warms up and does this again. My question is, could this be a head gasket going bad? If so would a tablet fix it for the time being? It has new plugs, wires, distributor, etc.
 

slystang

Founding Member
Jul 3, 1999
759
0
0
horseheads, Ny usa
Apr 13, 2004
#2
  • Apr 13, 2004
  • #2
Do you have any unusual smoke coming out of the tailpipe? To me it sounds more like you've got a problem with a sensor than a blown headgasket. Does your check engine light come on? You might have a bad O2 sensor. The computer doesn't acknowledge the information coming from the oxygen sensor until the vehicle warms up or for a set time limit from the time the car was started, even if it's already warm. If you've got access to a code scanner you should see if you've got any stored codes.
 

mustang90

Founding Member
Feb 8, 2001
1,209
15
58
Apr 13, 2004
#3
  • Apr 13, 2004
  • #3
The car is carberated and I do not notice any smoke. This has me stumped!
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Apr 13, 2004
#4
  • Apr 13, 2004
  • #4
What does the oil and coolant look like? How hot does your engine get?
 

mustang90

Founding Member
Feb 8, 2001
1,209
15
58
Apr 13, 2004
#5
  • Apr 13, 2004
  • #5
the engine temp does rise a good bit. its on my 1986 honda accord
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Apr 13, 2004
#6
  • Apr 13, 2004
  • #6
mustang90 said:
the engine temp does rise a good bit. its on my 1986 honda accord
Click to expand...

Would have helped if you had mentioned that earlier, LOL. Anyway, an engine will typically lose power and run poorly when it gets hot; you should be off the road and kill your engine once temp reaches 230. After that you're risking serious engine damage.
Again, what do your oil and coolant look like? If the coolant has a brown/orange look to it, or if your oil looks like a milkshake, you could definitely have a blown head gasket.
 

mustang90

Founding Member
Feb 8, 2001
1,209
15
58
Apr 13, 2004
#7
  • Apr 13, 2004
  • #7
I believe the oil looks brownish last time I drained it? Will a tablet fix it for the time being? It is an 86!
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Apr 13, 2004
#8
  • Apr 13, 2004
  • #8
Not familiar with this "tablet" you are referring to. Your oil should look almost whitish if coolant has gotten into it. You might just be running hot due to a bad t-stat, radiator, or any number of things.
 

slystang

Founding Member
Jul 3, 1999
759
0
0
horseheads, Ny usa
Apr 14, 2004
#9
  • Apr 14, 2004
  • #9
whoa! mid 80's Hondas! The ones I've worked on all had a ton of vacuum hoses, it's like there were 2 for everything they could control by vacuum. I'd get under the hood with the engine running and try to listen or feel for any vacuum leaks. Thats one of the main things with those cars when it comes to drivability problems.
 

mustang90

Founding Member
Feb 8, 2001
1,209
15
58
Apr 14, 2004
#10
  • Apr 14, 2004
  • #10
Thanks very much! The car does have tons of vaccum hoses! Its like everywhere you look there's a hose running from one side to another! Maybe some carb cleaner will find the leak?
 

blkstangman88

New Member
Apr 6, 2004
646
0
0
Apr 14, 2004
#11
  • Apr 14, 2004
  • #11
dont just look at the gaskets, check ur distribitor, my mustang, the moduel on the dictribitor went out and my car ran like crap everytime it was warm too....it wouldnt even accelerate
 

mustang90

Founding Member
Feb 8, 2001
1,209
15
58
Apr 15, 2004
#12
  • Apr 15, 2004
  • #12
I think its a vaccum leak. I will take a look and let you guys know. Englishtown swap meet is this friday, saturday and sunday so you know where I will be then!
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
313
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
1
Engine 91 mustang 302 Low acceleration car backfires pops and acts like it doesn’t want to take fuel
  • 1991Fox5.0
  • Oct 4, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Oct 6, 2025
1991Fox5.0
1
I
98 Mustang GT dying
  • ItsMason
  • May 14, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
163
1996 - 2004 SN95 Mustang -General/Talk- Jun 25, 2026
lenzgt
L
K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
224
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
115
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?