• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

BAD IDLE UP AND DOWN UP AND DOWN

  • Thread starter Thread starter mike7581
  • Start date Start date Oct 15, 2004

mike7581

New Member
Aug 18, 2004
42
0
0
Orange County, CA
Oct 15, 2004
#1
  • Oct 15, 2004
  • #1
I just finished my 2.3 - 5.0 swap and first went carbed but it pissed me off so i finished installing the EFI last night and started her up. she started right up but my idle is all messed up. it goes up and down up and down from aroun 500- 1500 constantly and enetually if i idle long enough it dies. my previous car was carbed so i am not to good with this efi thing what should i check for, where could my problem be
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Oct 16, 2004
#2
  • Oct 16, 2004
  • #2
any codes? did you set the idle? quickly, it is disconnecting the IAC connector, setting the screw and then the TPS accordingly. attach IAC connector and disconnect battery to discharge the KAM.

it can be a finicky thing - which is why im asking.
also, how is your vac? any leaks?
good luck and congrats on the swap.
 

mustangdaren

Founding Member
Apr 21, 2002
605
0
0
Hildebran, North Carolina
Oct 16, 2004
#3
  • Oct 16, 2004
  • #3
mike7581 said:
I just finished my 2.3 - 5.0 swap and first went carbed but it pissed me off so i finished installing the EFI last night and started her up. she started right up but my idle is all messed up. it goes up and down up and down from aroun 500- 1500 constantly and enetually if i idle long enough it dies. my previous car was carbed so i am not to good with this efi thing what should i check for, where could my problem be
Click to expand...

Adjust your throttle position screw so that the throttle is in the correct position using a feeler gauge. I forgot exactly what it is suppose to be but I am sure someone on here knows. After you have that set you will have to set your TPS voltage to .998v. I had the same problem that was about to drive me crazy after changing intake and throttle bodies. I would have never thought something so simple would have made it idle so smooth.
 
You must log in or register to reply here.

Similar threads

9
Electrical F150 ECU in a Foxbody? Idle surge help
  • 93royalblue
  • Sep 10, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
409
Fox 5.0 Mustang Tech Sep 17, 2025
Mustang5L5
Engine Surging idle on start-up
  • keel
  • Aug 11, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
902
Fox 5.0 Mustang Tech Oct 31, 2025
keel
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
682
Fox 5.0 Mustang Tech Jun 5, 2026
KRUISR
S
Electrical Convertible top goes up but not down
  • Scarlet Fox
  • May 9, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
317
Fox 5.0 Mustang Tech May 10, 2025
General karthief
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
951
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?