• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Bad Steering Wheel Vibration. Suspension experts in here.

  • Thread starter Thread starter 5o5speed
  • Start date Start date Oct 22, 2005

5o5speed

New Member
Aug 9, 2004
79
0
0
Oct 22, 2005
#1
  • Oct 22, 2005
  • #1
OK, I'm very frusterated with my 91 GT. Up until about 65-70mph the car is very smooth and enjoyable. However from about 70 on up my steering wheel bounces up and down way too much to the point where you can actually see it vibrating. It makes the car very unpleasnt to drive at highway speeds. I have H&R Supersport (750 lb) springs in front with Bilstein struts. Also have MM CC plates installed. I have had my tires balaned recently and it did not correct the problem. What could it be? I have driven cars with tires out of balance and this definently doesn't feel like that. The suspension of the car actually feels very smooth at all speeds but just so much vibration is coming through the steering column at 70 plus mph. Any help will be greatly appreciated. Thanks.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Oct 22, 2005
#2
  • Oct 22, 2005
  • #2
I would have to see it in person, since that isn't possible then here is what I would do. Lift the car and check the suspension for any play. It that was good I would then check the tires for a separation. If none is identified then if you can rotate the tires and test drive again and see if it moves to the back. If the probem was still not found I would be a little feeling "WTF" but then I would probally check things like wheel berrings and such. Oh, and be sure the wheels arn't bent. A bent wheel and/or separated tire will balance out fine, but it will ride like crap.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,027
1,618
194
NJ
Oct 22, 2005
#3
  • Oct 22, 2005
  • #3
I didn't see where you said it was aligned?

And what kind of rims do you have, and how where they balanced?
I know my rims MUST have wieghts placed on the inside and sticky wieghts on the outside. Not sure the name of the balancing method, but i think it's "dynamic" or "static" (one of the two) If i don't have it done this way, it will vibrate badly.
 

loveblueoval

New Member
Oct 25, 2002
23
0
0
Salt Lake City, UT.
Oct 22, 2005
#4
  • Oct 22, 2005
  • #4
My Gt has been doing the exact same thing, I take it to the tire shop and have them balance the tires and it still shakes at freeway speeds. I'm positive its the peice of s*** brake rotors I've got on My car, thay have to be balanced to, these peice of junk rotors were also warped within two weeks of me putting them on the car. AUTO ZONE JUNK!
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
Oct 23, 2005
#5
  • Oct 23, 2005
  • #5
Wheel Bearings are usually the culprit if the tires are balanced proper.
 

mondos90lx

Member
Nov 18, 2004
243
0
16
Stoneham Massachusetts
Oct 23, 2005
#6
  • Oct 23, 2005
  • #6
stock driveshaft maybe? i hear once people throw on an alluminum one bad vibrations go away
 
9

90bluecoupe

New Member
Aug 1, 2005
76
0
0
Abingdon md
Oct 23, 2005
#7
  • Oct 23, 2005
  • #7
I would start with the driveshaft, stock or aftermarket. If the bolts are lose then that would cause it.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Oct 23, 2005
#8
  • Oct 23, 2005
  • #8
2000xp8 said:
I didn't see where you said it was aligned?

And what kind of rims do you have, and how where they balanced?
I know my rims MUST have wieghts placed on the inside and sticky wieghts on the outside. Not sure the name of the balancing method, but i think it's "dynamic" or "static" (one of the two) If i don't have it done this way, it will vibrate badly.
Click to expand...
Exactly what he said. Do you have aftermarket wheels? With no weights showing on the outside? When I got to my store as assistant manager, I reamed every tech there for "static" balancing tires. The only thing you static balance is swamper or huge truck tires. These guys were static balancing BMW wheels, and wondering why they were coming back for vibes? An aluminum wheel dynamic balance would be your regular clip weight on the inside lip of the wheel, then sticky weights on the inside of the wheel right behind the spokes. It usually takes more weight this way, but it will work. It's always best to use weight as far out on the wheel as possible, but with aftermarket wheels (or if you're like me, you hate wheel weights on the outside) you sometimes have no choice. I say take the wheels off... see if they only used a clip weight on the inside, or a bunch of sticky weights right, dead center of the wheel. If it is like that... take them back and ask them to balance them in aluminum dynamic mode.
 
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Oct 23, 2005
#9
  • Oct 23, 2005
  • #9
2000xp8 said:
I didn't see where you said it was aligned?

And what kind of rims do you have, and how where they balanced?
I know my rims MUST have wieghts placed on the inside and sticky wieghts on the outside. Not sure the name of the balancing method, but i think it's "dynamic" or "static" (one of the two) If i don't have it done this way, it will vibrate badly.
Click to expand...

I agree with dynamic balancing; however, alignment issues will NOT cause vibration or a bad ride, only poor handling.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
Oct 24, 2005
#10
  • Oct 24, 2005
  • #10
mondos90lx said:
stock driveshaft maybe? i hear once people throw on an alluminum one bad vibrations go away
Click to expand...

Driveshaft vibrations are usually felt in the seat of the pants, not through the steering wheel.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Oct 24, 2005
#11
  • Oct 24, 2005
  • #11
I took my car to Jake Lomotta here in orlando like a month ago for the same reason. Above 60-65mph the starts vibrating like crazy. I have 275/40/17 tires all around on 9'' rims. They were blanaced and aligned. Jake told me when my new rack and pinon was installed they installed it wrong. I personally have more important things to fix, its not a life or death situation and i can live with it. Though i havent noticed it much since its come back, and they installed new upper rear control arms cause mine were cracked. I just ignore it. Probably something in your steering though
 
You must log in or register to reply here.

Similar threads

L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
213
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
J
Severe shaking/vibrations in steering wheel
  • jacket999
  • May 20, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
811
SN95 V6 Mustang Tech Jun 1, 2025
NtheGAME
N
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
664
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
314
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
Fox Suspensión Noise
  • PonyGTrider
  • Nov 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
387
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 8, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?