• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Bad vibrations

  • Thread starter Thread starter N8Dogg98
  • Start date Start date Jan 18, 2007
  • 1
  • 2
Next
1 of 2 Next Last

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Jan 18, 2007
#1
  • Jan 18, 2007
  • #1
I have a vibration that increases with speed. This has been going on for about a month, and seems to get worse each day. Is it safe to assume that it is the u-joints? The vibration is present regardless of whether the clutch engaged or not. Also, what will it cost to change the u-joints if that is the problem?
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Jan 18, 2007
#2
  • Jan 18, 2007
  • #2
I would suspect the tires myself.
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Jan 18, 2007
#3
  • Jan 18, 2007
  • #3
I have two sets of wheels and the vibration is present with each set. The vibration intensifies when accelerating and decelerating, and is more subdued at constant speed. It sounds like it is coming from the driveline.
 

Shiroelex

There's nothing worse than aut
Founding Member
Aug 23, 2001
728
1
27
Westland, MI
Jan 18, 2007
#4
  • Jan 18, 2007
  • #4
Is your car a 5 speed? My old clutch started to shake a bit when it was on it's way out. You can tell if a U-joint is bad if you get under there and give the driveshaft a little jiggle. When they are bad to the point to where they are causing vibrations or clunking, you can see the damage usually. Does the vibration change with RPM, or only speed?
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Jan 18, 2007
#5
  • Jan 18, 2007
  • #5
It is a 5 speed and the vibration is present at speed, although it seems worse with the car in gear (but that may be the o/r h pipe and cat back causing the extra racket). The other strange thing, is at low speed I hear a squeaking sound that intensifies with speed and goes away at around 10 MPH. It does not matter if the car is in gear or not, and the clutch position does not change the squeak.
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Jan 18, 2007
#6
  • Jan 18, 2007
  • #6
Yep. Sounds like a u-joint then. Does this squeeking have a sound like it's occuring at a rate that is about 3-4 times faster than the wheels are turning? I don't know if that makes sense or not.
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Jan 18, 2007
#7
  • Jan 18, 2007
  • #7
Yeah the squeak is occuring at a quicker rate than the wheels are turning
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Jan 18, 2007
#8
  • Jan 18, 2007
  • #8
Yep...u-joint. There's a small chance that it's a pinion bearing, but I'd lean toward the u-joint.
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Jan 18, 2007
#9
  • Jan 18, 2007
  • #9
Keep us posted.
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Jan 18, 2007
#10
  • Jan 18, 2007
  • #10
Thanks, I really appreciate your input.
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Jan 18, 2007
#11
  • Jan 18, 2007
  • #11
Is it a real deep tone? Sort of like a sub woofer with a steady sound coming from it? Happens at a certain RPM in all gears?

If so...U-joint.
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Jan 19, 2007
#12
  • Jan 19, 2007
  • #12
COramprat said:
.... Happens at a certain RPM in all gears?

....
Click to expand...

Wouldn't that indicate a problem upstream of the final drive?

I think, and he'll correct me if I'm wrong, he's hearing more of a chirping sound.
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Jan 19, 2007
#13
  • Jan 19, 2007
  • #13
It is a real deep tone like you described along with some squeaking and chirping at low speed and under load at higher speed.
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Jan 19, 2007
#14
  • Jan 19, 2007
  • #14
Perhaps yours is a little further along than mine. ?
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Jan 22, 2007
#15
  • Jan 22, 2007
  • #15
It was a u-joint. The front one was horrible, but I had both replaced since the driveshaft was out. What a difference it made, she drives like new again! Thanks for all of your input, I appreciate it.
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Jan 22, 2007
#16
  • Jan 22, 2007
  • #16
Excellent!! Glad to see it's all set.
 

DTNODYA

Member
Dec 15, 2005
831
1
16
Jan 22, 2007
#17
  • Jan 22, 2007
  • #17
Was it shaking/bouncing whatever at all speeds or did it go away at a certain speed? Reason I ask is because yesterday my car developed a shaking type feel on the highway but goes away at about 75mph. My shifter is bouncing/vibrating too .... I know it's not tires/alignment. What would you all guess, trans mounts, engine mounts, u joints?
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Jan 22, 2007
#18
  • Jan 22, 2007
  • #18
N8Dogg98 said:
It was a u-joint. The front one was horrible, but I had both replaced since the driveshaft was out. What a difference it made, she drives like new again! Thanks for all of your input, I appreciate it.
Click to expand...

Glad it worked out

DTNODYA said:
Was it shaking/bouncing whatever at all speeds or did it go away at a certain speed? Reason I ask is because yesterday my car developed a shaking type feel on the highway but goes away at about 75mph. My shifter is bouncing/vibrating too .... I know it's not tires/alignment. What would you all guess, trans mounts, engine mounts, u joints?
Click to expand...

My guess is tranny mount. Mine is doing the same exact thing but I have a new mount. I'm thinking it is screwed up too. Tranny mounts a cheap and easy to replace. I think I'm just going to pick up another.
 

the_rooster

New Member
Jul 12, 2006
32
0
0
philadelphia pa
Jan 23, 2007
#19
  • Jan 23, 2007
  • #19
Dont mean to hijack but i have the same sort of problem. Here goes:

There is a high piched squeak that only happens with the clutch engaged and when i am accelerating, i can just let the clutch out and it isnt there. Its coming from the front of the car i'm almost positive of that. I just had 4 new ties put on and no change. It also seems to not be so pronounced the longer i drive.

Thanks for any help.
 

Stang|ess

seeking cyber partner(s)
Oct 18, 2003
941
0
37
Hawaii
Jan 23, 2007
#20
  • Jan 23, 2007
  • #20
the_rooster said:
Dont mean to hijack but i have the same sort of problem. Here goes:

There is a high piched squeak that only happens with the clutch engaged and when i am accelerating, i can just let the clutch out and it isnt there. Its coming from the front of the car i'm almost positive of that. I just had 4 new ties put on and no change. It also seems to not be so pronounced the longer i drive.

Thanks for any help.
Click to expand...

throw out bearing.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
671
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
356
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
17
Views
995
SN95 V6 Mustang Tech Aug 29, 2026
joeybuddy96
J
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
863
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
505
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?