• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

BBK 78mm TB?

  • Thread starter Thread starter scupking
  • Start date Start date Oct 15, 2008
  • 1
  • 2
Next
1 of 2 Next Last

scupking

Active Member
Sep 18, 2005
1,186
1
36
Enfield, CT
Oct 15, 2008
#1
  • Oct 15, 2008
  • #1
Any one see this or run this? BBK: 1996-2004 Mustang 4.6L GT 78mm Throttle Intake
 

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Oct 15, 2008
#2
  • Oct 15, 2008
  • #2
I saw a post aboot this a while back and i think the general concencus was that 78mm would be overkill on a NA setup but with boost it would be a good piece. I pretty much agree with that. I think its kinda cool looking IMO
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 15, 2008
#3
  • Oct 15, 2008
  • #3
02nightmaregt said:
I saw a post aboot this a while back and i think the general concencus was that 78mm would be overkill on a NA setup but with boost it would be a good piece. I pretty much agree with that. I think its kinda cool looking IMO
Click to expand...

Overkill....yes. But not to the point where it would have any kind of detremental effects on power. You may not be able to utilize all of that airflow on a stock engine, but it's not going to cost you anything across the board as far as torque or horsepower either.

As far as Mod motors goes, bigger is almost always better where throttle bodies are concerned.
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Oct 15, 2008
#4
  • Oct 15, 2008
  • #4
I'm putting a 90mm lightning MAF where the thottle body goes with a butterfly valve - mas CMFs!!!!!
 
F

FastMustangGT

New Member
Aug 13, 2005
53
0
0
Massachusetts
Oct 15, 2008
#5
  • Oct 15, 2008
  • #5
going from a 75mm to a 78mm Tb can't me much of a difference right? I'd imagine you could port a 75mm to that size or even bigger...?
 
G

GettinThere

Member
Jul 29, 2005
553
1
19
Central Texas
Oct 15, 2008
#6
  • Oct 15, 2008
  • #6
$250, interesting, might be a good deal.
 

scupking

Active Member
Sep 18, 2005
1,186
1
36
Enfield, CT
Oct 15, 2008
#7
  • Oct 15, 2008
  • #7
If I didn't have a 75mm I would go with the 78. I'm putting stage II cams in so the bigger the better for me.
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Oct 15, 2008
#8
  • Oct 15, 2008
  • #8
scupking said:
If I didn't have a 75mm I would go with the 78. I'm putting stage II cams in so the bigger the better for me.
Click to expand...
You only flow as much as your weakest link - if your heads flow 165cfm peak and you have a TB the size of a trashcan you're still only tapping in on 165cfm of that. Same for intake manfiold,MAF... ect.
 

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!
Founding Member
Nov 29, 1999
5,520
1,291
224
H Town
Oct 15, 2008
#9
  • Oct 15, 2008
  • #9
stick with the stock tb.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 15, 2008
#10
  • Oct 15, 2008
  • #10
CobraRed_96_GT said:
You only flow as much as your weakest link - if your heads flow 165cfm peak and you have a TB the size of a trashcan you're still only tapping in on 165cfm of that. Same for intake manfiold,MAF... ect.
Click to expand...

Until you throw forced induction into the mix.
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Oct 15, 2008
#11
  • Oct 15, 2008
  • #11
Gearbanger 101 said:
Until you throw forced induction into the mix.
Click to expand...
Exactly
 

mazen189

Member
Jul 31, 2007
424
0
16
I.E. southern california
Oct 15, 2008
#12
  • Oct 15, 2008
  • #12
man, i was actually thinking about this product for my next future mod.
should i jus get a bbk plenum and bbk 75 mm throttle body then?
any imput from the wise is always good.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 16, 2008
#13
  • Oct 16, 2008
  • #13
mazen189 said:
man, i was actually thinking about this product for my next future mod.
should i jus get a bbk plenum and bbk 75 mm throttle body then?
any imput from the wise is always good.
Click to expand...

If you've got big or even moderate power in your plans (Heads, intake and/or power adder) go ahead and grab the 78mm intake combo. It's cheaper than buying them seperatley and I doubt (unless you plan on going with a Positive Displacement supercharger in the future) you'll ever need to swap it out, or upgrade to anything different.

If simple bolt ons are all you're after, then this unit isn't necessary....but then again neither is a 75...or even 70mm T/B swap for that matter.
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Oct 16, 2008
#14
  • Oct 16, 2008
  • #14
mazen189 said:
man, i was actually thinking about this product for my next future mod.
should i jus get a bbk plenum and bbk 75 mm throttle body then?
any imput from the wise is always good.
Click to expand...
Don't not buy it (even if mating it up to the intake piping might be almost impossible) just because it wont help for sure over 70 or 75's. We're just saying that buying bigger isn't needed to make power in this case, it'd be like buying bigger shoes to run faster; if you don't need bigger shoes you wont run any faster - ya dig?
 

mazen189

Member
Jul 31, 2007
424
0
16
I.E. southern california
Oct 16, 2008
#15
  • Oct 16, 2008
  • #15
a plunum and 75 mm throttle body would be best FIT then huh?
because i have the bbk plenum and throttle body combo on my 98, and its great. however, i never really heard anything about the throttle plunum until today. and like a few others, i didnt think it would be a big differense from 75mm to 78mm. but, i guess so.
but your imput made sense, thanks chris.
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Oct 16, 2008
#16
  • Oct 16, 2008
  • #16
mazen189 said:
a plunum and 75 mm throttle body would be best FIT then huh?
because i have the bbk plenum and throttle body combo on my 98, and its great. however, i never really heard anything about the throttle plunum until today. and like a few others, i didnt think it would be a big differense from 75mm to 78mm. but, i guess so.
but your imput made sense, thanks chris.
Click to expand...
Anytime man, I doubt I even need all 75mm's with ported heads revving to 6300
 

mazen189

Member
Jul 31, 2007
424
0
16
I.E. southern california
Oct 16, 2008
#17
  • Oct 16, 2008
  • #17
CobraRed_96_GT said:
Anytime man, I doubt I even need all 75mm's with ported heads revving to 6300
Click to expand...

like i said, good imput mang, and hows your school schedule this quarter?
ne time for a shoot?
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Oct 16, 2008
#18
  • Oct 16, 2008
  • #18
mazen189 said:
like i said, good imput mang, and hows your school schedule this quarter?
ne time for a shoot?
Click to expand...
For sure - bust my ass tues-thurs with classes then spend a good amount of the rest of the week writing and reading. But i do have fri-mon technically off. But paint definitely took a beating the 3 or so months it was being wrenched on since i never had the car cover on and couldn't wash/wax it with no hood on.
 

mazen189

Member
Jul 31, 2007
424
0
16
I.E. southern california
Oct 16, 2008
#19
  • Oct 16, 2008
  • #19
CobraRed_96_GT said:
For sure - bust my ass tues-thurs with classes then spend a good amount of the rest of the week writing and reading. But i do have fri-mon technically off. But paint definitely took a beating the 3 or so months it was being wrenched on since i never had the car cover on and couldn't wash/wax it with no hood on.
Click to expand...

i bet man, im not talkin anytime soon cause i go tuesday/wednesday/thursday to school then usually work friday nights through monday morning, and my job is anal, so anytime i needa request a day off, it has to be waaaay in advance. hmmm, i think we have november 11th or 13th off for some reason, and its a tuesday too,

you guys have that tuesday off?
 

myponyrocks

I have more billet on the Stang than most women ha
Apr 18, 2004
1,219
0
37
Oct 16, 2008
#20
  • Oct 16, 2008
  • #20
I have it, swapped out my 75mm Accufab and plenum for it because I've been chasing down an idle issue.

Any way performs the same as the accufab as far as I can tell. It was a nice piece, typical BBK part requires about 5 minutes with a push pin to clean burrs off but for the price, who cares. Everything fit very well. AND I even knocked my idle down about 200 more RPM than the accufab was letting me.

If you don't have a plenum and T/B allready, it's a good purchase. If you do have one, ya don't need this.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

O
Resolved 2004 Mustang GT 4.6. No crank, no dash lights, No headlights or dome, No radio, no Hazards.
  • oldtimeracer
  • Aug 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
178
1996 - 2004 SN95 Mustang -General/Talk- Aug 17, 2026
oldtimeracer
O
M
My numbers sound right?
  • MiltP
  • Feb 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
28
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Apr 2, 2026
MiltP
M
B
97 GT with 03 explorer Eddie Bauer edition 4.6l
  • basbill73
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
149
1996 - 2004 SN95 Mustang -General/Talk- May 11, 2026
squeak93
M
Hey all
  • Mikalikey
  • Aug 20, 2026
  • The Welcome Wagon
Replies
3
Views
164
The Welcome Wagon Aug 20, 2026
Mikalikey
M
D
Tune erased/wont start/91 fox body
  • drew123
  • Jun 15, 2026
  • Digital Self-tuning Forum
Replies
2
Views
276
Digital Self-tuning Forum Aug 7, 2026
drew123
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?