BBK SSI Question

I Just installed a BBK SSI intake on my 89 Mustang LX. After starting, timing, and test driving, I could smell oil burning. I took the top plate off of the SSI intake, and there is a pool of oil in the upper intake. What did I do wrong? I was supposed to be going to the track tomorrow night, but if I don't get this fixed, I won't be able to. Please help.

I got it figured out. I bought the intake used, and whoever I bought it from put the plate on the bottom of the lower intoke on backwards. There is supposed to be a slight gap in the back and a big gap in front, but the big gap was on the back allowing excessive oil through the PCV valve. For tonight, I just plugged the back of the intake and ran the PCV hose to a separate canister. I'll remove it and fix it after tonight. Can't miss a night at the drags!!!!!