• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Beggining My Engine Upgrades

  • Thread starter Thread starter JoniNitro
  • Start date Start date Feb 4, 2006
J

JoniNitro

New Member
Feb 4, 2006
11
0
0
Feb 4, 2006
#1
  • Feb 4, 2006
  • #1
First off let me say hello....Hello. I have recently purchased a 1994 Cobra with 55K and I am itching to get this thing moving down the road faster. My suspension is already in the works so I have taken care of that first. I have have been around Mustangs for a while especially the 5.0. I am also a work as a contrustion equipment tech/mech so I am not a newb when it comes to wrenching on a vehicle.

Now, what I am looking for is possible engine combos for my car. Being as the mileage is low on the car I want to keep the stock bottom end for a while. For now I would like to shoot for something in the mid 12 sec range. I am going with a street suspension and 315 DR in the rear so I will have some traction. The car also has 3:55's so that helps. I am curios to know what things work well together. What part of the Cobra setup can I keep. For instance if I get a good PnP on the upper and lower intake what are its limitaions. I believe the car comes with 1.7RR's stock correct? Here were my thoughts. I was going to do GT40X heads and maybe a B or E cam. I eventually want to run a SC so I want the setup to be run will with mild boost. The care is not a daily driver, but I do want it to be some what tame on the street. Also, any info on what else will need to be upgraded as well. Like fuel and ignition upgrades. I am looking for specific recommendations so I can start getting the budget ready. Thanks guys!
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Feb 4, 2006
#2
  • Feb 4, 2006
  • #2
JoniNitro said:
First off let me say hello....Hello.
Click to expand...
First Hi

Now, what I am looking for is possible engine combos for my car. Being as the mileage is low on the car I want to keep the stock bottom end for a while. For now I would like to shoot for something in the mid 12 sec range.
Click to expand...
AT the top you'll see a sticky saying 95/94 GT/Cobra FAQ section. It has a lot of combos and what they run, and what heads/cam/intake they used.

For instance if I get a good PnP on the upper and lower intake what are its limitaions.
Click to expand...
A PnP cobra (upper&lower) could hang with pretty much any stock aftermarket intake from what I've seen
I believe the car comes with 1.7RR's stock correct?
Click to expand...
Correct
Here were my thoughts. I was going to do GT40X heads
Click to expand...
For what you pay going with better head like TrickFlow TW heads, AFR 165's, Edelbrock performers. They are all with ion the same price range.
and maybe a B or E cam.
Click to expand...
Ford letter cams are outdated there are other cams that will preform better imo. But the stock cam can get you into the mid 12's boosting
I eventually want to run a SC so I want the setup to be run will with mild boost. The care is not a daily driver, but I do want it to be some what tame on the street. Also, any info on what else will need to be upgraded as well. Like fuel and ignition upgrades. I am looking for specific recommendations so I can start getting the budget ready. Thanks guys!
Click to expand...
Fuel pump (walboro 255lph forced induction), fuel injectors (36lbs), MSD 6 AL, colder spark plugs with 32 gap (Autolite work well), larger throttle body 70/75mm, Pro-M 80mm (matching the injector size), long tubes headers, H pipe (X pipes make just a few more hp but have a higher pitched tone). That's all I got good luck and use the search button it is your friend (sometimes)
 
You must log in or register to reply here.

Similar threads

D
97 V6 suspension upgrades
  • Dale1bre
  • Jan 18, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
348
SN95 V6 Mustang Tech Jan 19, 2026
Noobz347
J
Wheels-Tires Need Some Help - Brakes Upgrade/Wheel fitment
  • jaygee15
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
81
Views
3K
Fox 5.0 Mustang Tech May 6, 2026
AeroCoupe
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
248
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
G
Hello and Instrument Wiring
  • GT Jon
  • Jul 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
95
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 6, 2026
Mustang5L5
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
222
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?