belt is rubbing on bolt between crankshaft pulley and power steering pump

Shadownewedge

New Member
Nov 4, 2022
1
0
1
Virginia
so I recently replaced my power steering pump and now my belt is rubbing on a bolt between the crankshaft pulley and the power steering pump. the belt is routed correctly and I reused the old pulley. If anyone has suggestions or help it would be greatly appreciated
F7385856-F569-44A2-A6B0-61AF9A4DEAD2.jpeg
1B50CAB4-A0DC-44FD-A3DE-1D615EEB7E8E.jpeg
AF398B2C-63A7-4B73-93AB-56883E443714.jpeg
 
  • Sponsors (?)


You peaked my curiosity, so I went and looked on my 2002. On my car, that stud is cut short. I'm the original owner, never remember that being an issue when I replaced the belts or did the pulleys. I'm not sure what those are for, I took these in the dark reaching in with my phone. Did you perchance switch the studs around?
 

Attachments

  • IMG_20221108_221912.jpg
    IMG_20221108_221912.jpg
    455.1 KB · Views: 65
  • IMG_20221108_222237.jpg
    IMG_20221108_222237.jpg
    506.6 KB · Views: 44
  • IMG_20221108_222251.jpg
    IMG_20221108_222251.jpg
    412.4 KB · Views: 54