• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Benefit to having MSD stuff?

  • Thread starter Thread starter webshot
  • Start date Start date May 6, 2008
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
May 6, 2008
#1
  • May 6, 2008
  • #1
Just trying to figure out what if any benefit is it to having the full MSD setup (box, coil, distributor and wires) on a stock engine? It was recommended that I invest in it. The car is a 88GT bone stock. I do plan in the future to add some mild mods, but nothing earth shattering.
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
May 6, 2008
#2
  • May 6, 2008
  • #2
Upgrading the ignition on a stock engine only affects reliability. Although some question the reliability of the aftermarket parts. You will not see any noticeable gain in performance over stock ignition components unless your stock parts aren't in good shape.
 
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
May 6, 2008
#3
  • May 6, 2008
  • #3
when you say reliability what does that mean? It will prolong the life of the engine? Improve gas mileage? I know it looks pretty cool to see that stuff under your hood. Just trying to figure what is the gain in it? Also my plan in the future consists of a mild HCI or supercharger, exhaust upgrades, electric fan..... Will the MSD addition then become more of a value?
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
May 6, 2008
#4
  • May 6, 2008
  • #4
When I say reliability I'm only talking about the ignition components. Quality MSD, Jacobs, Mallory, Accel, etc components will last longer than your Auto Zone, Advanced, Orielly, etc remanufactured parts. Now some will argue that the quality isn't the best on aftermarket parts when compared to stock motorcraft/ford parts. You won't really see gains in HP, fuel economy, driveability by upgrading unless the parts that are on your car now are worn and causing the engine to run less the optimal. Once you start upgrading components and need a more control over the ignition system that is where the aftermarket parts will make the difference. If you plan on running a supercharger, turbo, or nitrous, you will want to be able to retard the spark based on boost. This can be done with the aftermarket parts with boost controls.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 6, 2008
#5
  • May 6, 2008
  • #5
I dislike the magizines showing huge hp gains with ignition upgrades. The majority of the time a simple tune up with factory parts will do the same thing. Factory ignition is good for most everyones slight mods. The nice thing with aftermarket pieces is you can set your rev limitor you can have timing retard if you are running nitrous or boost. I have after market ignition pieces and I love them since I run nitrous and it automatically takes timing out of the system.
 
W

webshot

Member
Sep 11, 2005
738
0
17
Yay Area, California
May 6, 2008
#6
  • May 6, 2008
  • #6
Thanks guys, my stock stuff seems to be fine. So at this point other than looking cool no real gain for me. I will spend that money elsewhere.
 

enyawix

Member
Dec 18, 2005
507
0
19
127.0.0.1
May 6, 2008
#7
  • May 6, 2008
  • #7
webshot said:
Just trying to figure out what if any benefit is it to having the full MSD setup (box, coil, distributor and wires) on a stock engine? It was recommended that I invest in it. The car is a 88GT bone stock. I do plan in the future to add some mild mods, but nothing earth shattering.
Click to expand...


MSD setup is pointless on a stock engine "in good tune". You only need an MSD setup when you have enough force inside the cylinders to blow out the spark. no spark = no power. A msd setup can help if your mix is too lean or to rich. Tune to the rich side lean is just not safe.
 
D

Deleted member 87397

May 6, 2008
#8
  • May 6, 2008
  • #8
A setup like that will smooth out your idle a bit and it will rev smoother, but as mentioned it will not net you any huge power gains. You wouldn't need a setup like that unless you are running nitrous or boost. It's overkill on a stocker.
 

speedtrip

Member
May 22, 2005
93
5
9
Jerkwater, U.S.A
May 6, 2008
#9
  • May 6, 2008
  • #9
My msd digital 6 lasted a little over a year. Sent it back response was unit was fully potted and couldnt be repaired. Bad first expierience with msd might buy another one not sure yet. Tryin to save money to finish afr 165 comp,fti cam combo ill buy ignition after i get engine together.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 6, 2008
#10
  • May 6, 2008
  • #10
I have had my digital 6 in my car for 7 years now and had no issues with it. It has been a good piece.
 

speedtrip

Member
May 22, 2005
93
5
9
Jerkwater, U.S.A
May 7, 2008
#11
  • May 7, 2008
  • #11
Thats good news 86blue. Maybe i got a bad one. I loved the digital 6 while it lasted especially timing retard for the nos.
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
May 7, 2008
#12
  • May 7, 2008
  • #12
I read some where that stock ign. was good up untill 400hp range.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 7, 2008
#13
  • May 7, 2008
  • #13
speedtrip said:
Thats good news 86blue. Maybe i got a bad one. I loved the digital 6 while it lasted especially timing retard for the nos.
Click to expand...

Yes the timing retard for my nitrous is the reason I bought it.
 
You must log in or register to reply here.

Similar threads

K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
397
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
482
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
455
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
464
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?