One of the most popular speed density cams is the Crower 15511 because of its wide LSA 114* or you could go custom. The crower will run you about 250.00 for a little more you could go custom.
on 86 models you cant install a cam if it still has stock pistons , they have no reliefs cut in the piston at all so you have no clearance for one ......you can put pistons in the engine or flycut your pistons with a special tool......if the engines been rebuilt before you might already have flycut pistons in there but if your not sure , you might wanna pull the heads to see .....alot of people will look for 87-93 engines to swap but rebuilding makes more sense to me ...