• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

best lube for clutch cable

  • Thread starter Thread starter txgunrunner
  • Start date Start date May 22, 2005

txgunrunner

New Member
Apr 29, 2005
68
0
0
houston, tx
May 22, 2005
#1
  • May 22, 2005
  • #1
i know some people say not to lube the clutch cable but my new cable w/ adjustable quadrant is sticky as hell. i tried to run it under the k member but it was too short so i had to run it above it so now i'm going to lube the hell out of it and hope it solves the problem. what should i lube it with? thanks for the help
 

ram360

Founding Member
Oct 19, 2002
2,162
1
59
Pennsylvania
May 22, 2005
#2
  • May 22, 2005
  • #2
never heard of doing that plus you shouldn't need too. Sounds like you have it kinked or something might want to try to re route the cable another way.
 

85 Capri

New Member
Aug 18, 2004
8
0
0
GTA, Canada
May 22, 2005
#3
  • May 22, 2005
  • #3
If I did lube the cable, I would use something with liquid graphite in it. They have some that is advertised for locks, but also works good for cables, after the initial lube is gone the Graphite is left behind for permanent lubrication! Just my $.02
 

txgunrunner

New Member
Apr 29, 2005
68
0
0
houston, tx
May 22, 2005
#4
  • May 22, 2005
  • #4
the cable is not kinked, it has a good size bend in it. the weird thing is that the pedal will feel good at times but then go back to sticking excessively and you can hear the cable creaking. i'll try the graphite lube, do the major auto stores carry it.
 

txgunrunner

New Member
Apr 29, 2005
68
0
0
houston, tx
May 22, 2005
#5
  • May 22, 2005
  • #5
i was just thinking that the longer i drive the car the worse it gets. could the heat from headers cause the cable sleeve to swell and put the cable in a bind. i've got the cable as far away from the headers as possible.
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
May 22, 2005
#6
  • May 22, 2005
  • #6
I have used plain old bearing grease. Took the cable out and lubed each end with sliding the cable back and forth to get the grease down into the cable. It was MUCH easier after that and still runs good after 5 years.

Also the best kind of cable is a STOCK NON ADJUSTABLE cable like this one for $39.

http://www.buyfordracing.com/shop/product_info.php?products_id=374
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
May 22, 2005
#7
  • May 22, 2005
  • #7
Yep go with the link above (I got that clutch cable as well)...it softened my pedal right up...

I have heard of people using White Lithium Spray Grease...which is kind of foamy. I have a brand new can of it...I was going to lube the cable...but the cable was new and I decided not to lube it. If you lube it you could get some dirt particles in their and eventually cause premature stiffen pedal effort or clutch cable failure.

My adjustable clutch cable I had was all bound up like yours...it got gummed up in there and the new cable was SO much better...

Route it as smoothly as possible...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 22, 2005
#8
  • May 22, 2005
  • #8
Are you sure it is not the bearing retainer that is creating the 'stickyness' you experience?

good luck.
 

txgunrunner

New Member
Apr 29, 2005
68
0
0
houston, tx
May 22, 2005
#9
  • May 22, 2005
  • #9
dont think so, just had the tranny rebuilt and it had a steel one alrady that was in good shape. thanks
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
May 22, 2005
#10
  • May 22, 2005
  • #10
his routing is way, way, way wrong. Don't even bother lubing it, that's a temporary fix, if you're even lucky to what sounds like a complete bull**** cable.

very curious, where did you get this cable? it's got to go under the k member, no ifs ands or buts. Get a real cable, and reroute it properly
 

txgunrunner

New Member
Apr 29, 2005
68
0
0
houston, tx
May 23, 2005
#11
  • May 23, 2005
  • #11
i got the cable from comp sales in houston for 140 bucks. it's a gates, gale or something like that.
 

85 Capri

New Member
Aug 18, 2004
8
0
0
GTA, Canada
May 23, 2005
#12
  • May 23, 2005
  • #12
yes, the Graphite lube is available at any parts store. The good thing about it is that its a runny liquid, so geting along the length of the cable isn't a prob. But if the others mention a problem with the routing, take car of that first. If you think its far away from the headers, try touching the cable after a long drive?
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
May 23, 2005
#13
  • May 23, 2005
  • #13
txgunrunner said:
i got the cable from comp sales in houston for 140 bucks. it's a gates, gale or something like that.
Click to expand...
$140. Ouch.

Bring it back and buy a Ford cable for $39.
 
You must log in or register to reply here.

Similar threads

Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
903
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
Drivetrain Time to pull and lube the clutch cable
  • LX Dave
  • Dec 21, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
30
Views
2K
Fox 5.0 Mustang Tech Jan 7, 2025
limp
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
562
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
00 4.6L V8 new clutch won’t go into gear when on?
  • Timboslice
  • Aug 15, 2026
  • The Welcome Wagon
Replies
3
Views
244
The Welcome Wagon Aug 21, 2026
Noobz347
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
755
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?