Best sounding and flowing exhaust system for 5.0 ? 2.5" 3" ??

S

superdutyt5

New Member

Jan 2, 2004

30

0

0

Jan 9, 2004

#1

• Jan 9, 2004

• #1

Does anyone know where I could find a web site where I can listen to the difffernt sounds of mufflers/exhaust systems. My flotech exhaust I realized was like only a 2" or mabye even 1 5'8s or something horribly restrictive and I must get a new one so my motor and flow better. What size do you recomend and brand etc. Some people say 3" would be ok because I have got the weight "Under 2800 lbs" down further so I could give up some torque for more higher end horsepower. 2.5" - 3" sounds good to me. what do you all think ? Flowmaster, edelbrock,dynomax,borla, ?

 

gaslight

Founding Member

Jul 12, 2000

3,365

16

99

Maine

Jan 9, 2004

#2

• Jan 9, 2004

• #2

http://www.exhaustsoundclips.com/ford.html
http://www.mustangexhaust.com/
You don't want to go to large on your exhaust because you will lose power. Weight has nothing to do with the air and exhaust flow of your engine. stay with 2.5 inch. only go bigger if you have major power adder and plan on doing a lot of racing.

 

Black 93 Fox

Active Member

Jun 1, 2003

1,995

0

49

Vancouver,Washington

www.cardomain.com

Jan 9, 2004

#3

• Jan 9, 2004

• #3

You need alot of power to have 3' exhaust. bigger the exhaust the more backpressure you lose.

 

S

superdutyt5

New Member

Jan 2, 2004

30

0

0

Jan 9, 2004

#4

• Jan 9, 2004

• #4

ya thats true... 2.5 will do then

 

JadeFalcon

Founding Member

Mar 28, 2002

1,924

0

0

43

Arlington, TX

www.planetquake.com

Jan 9, 2004

#5

• Jan 9, 2004

• #5

http://home.comcast.net/~cjshull/CJStangRun.mov

I always show people this video if they want to know what 3" exhaust sounds like.

 

OLDJUNK93

Member

Mar 12, 2003

77

0

6

53

kansas

www.yahoo.com

Jan 9, 2004

#6

• Jan 9, 2004

• #6

JadeFalcon said:

http://home.comcast.net/~cjshull/CJStangRun.mov

I always show people this video if they want to know what 3" exhaust sounds like.

Click to expand...

that is one of the best videos i have seen on sn. your car is a real bad a**. nice job.

 

mike keirstead

New Member

Aug 6, 2003

1,121

0

0

112

ROLLING A JOINT

Jan 9, 2004

#7

• Jan 9, 2004

• #7

I have.....MAC longtubes...custom o/r x-pipe....dynomax race bullets..all 2.5 inch.


Probably wont find a higher flowing setup than that for 2.5 and 1 5/8 headers....sounds unreal at WOT

 

banditmwp

New Member

Jan 9, 2004

218

1

0

46

Opelika/Auburn, AL

Jan 9, 2004

#8

• Jan 9, 2004

• #8

http://www.mustangworld.com/ourpics/sounds/sounds.htm

 

S

superdutyt5

New Member

Jan 2, 2004

30

0

0

Jan 10, 2004

#9

• Jan 10, 2004

• #9

JadeFalcon said:

http://home.comcast.net/~cjshull/CJStangRun.mov

I always show people this video if they want to know what 3" exhaust sounds like.

Click to expand...

which mufflers did he have on that stang anyway ? I think I want to go that sound

 

1

1hot5.0

Founding Member

Sep 6, 2002

1,615

0

0

40

Surprise, Arizona

Jan 10, 2004

#10

• Jan 10, 2004

• #10

superdutyt5 said:

which mufflers did he have on that stang anyway ? I think I want to go that sound

Click to expand...

Spintech Pro Streets I believe.

 

DemonGT

Founding Member

May 24, 2002

871

51

49

Sparta,WI

Jan 10, 2004

#11

• Jan 10, 2004

• #11

talk about nasty sounding...my car was pretty stock...full mac exhaust...maf,TB and a TFS intake...thats it...so thats what i was used to...but after installing 400+ cubes with more compression...and a farly health cam...and 3 inch mac exhaust with dumps...i was walken around the garage with my a$$ cheeks clenched for quite some time after first hearing it LOL

at idle mind sounds alot like falcons car..but deeper and more rumbly...and when i rev it its not so high pitched and screachy...probubly cause of the Mac mufflers and the engine size? dunno

 

M

mustangrfast88

Founding Member

Sep 22, 2002

330

0

0

44

middletown ohio

Jan 10, 2004

#12

• Jan 10, 2004

• #12

i have always like the way a full mac setup sounds on all my cars and trucks i run mac exhaust but on my mustang 2.5 is way more then enough you only need 3 inch for over 500 horsepower. but the exhaust setup i would run would be mac 1 5/8 headers long tube, mac prochamber, mac cat back system with 2.5 tips or 3.5 it is up to you

 

mustangmuscle87

New Member

Jan 10, 2004

12

0

0

Jan 10, 2004

#13

• Jan 10, 2004

• #13

Flowmaster's web site has sound clips on it

 

S

superdutyt5

New Member

Jan 2, 2004

30

0

0

Jan 11, 2004

#14

• Jan 11, 2004

• #14

Ya but I have heard some bad things about how restrictive flowmasters are.

 

mike keirstead

New Member

Aug 6, 2003

1,121

0

0

112

ROLLING A JOINT

Jan 11, 2004

#15

• Jan 11, 2004

• #15

True the DRONEMASTERS are very restictive versus the newer mufflers that are now out........DONT BE AFFRAID OF THE DYNOMAX RACE BULLETS .......if you want not-restrictive!

 

bigsparky

New Member

May 14, 2003

334

0

0

41

Saskatoon, Saskatchewan

Jan 11, 2004

#16

• Jan 11, 2004

• #16

which site has a sound-clip of the dynomax race bullets?

 

speedracer238

New Member

Sep 18, 2003

141

0

0

42

Clawson, MI

Jan 11, 2004

#17

• Jan 11, 2004

• #17

http://ubb.mustangexhaust.com/

It has a bunch of sound clips and tells you what the setups are.

 

mike keirstead

New Member

Aug 6, 2003

1,121

0

0

112

ROLLING A JOINT

Jan 11, 2004

#18

• Jan 11, 2004

• #18

http://mustangdaren.web.aplus.net/sitebuildercontent/sitebuilderfiles/mov00079.mpg

This a clip at an idle. NOT MY CAR!

 

mike keirstead

New Member

Aug 6, 2003

1,121

0

0

112

ROLLING A JOINT

Jan 11, 2004

#19

• Jan 11, 2004

• #19

Also www.dynomax.com has the ultra flow welded clip on a stang with an x-pipe.

I had the ultraflows and the race bullets are a little louder and sound better at an idle but it will give you a very close idea.

 

JaysGreenLX

Founding Member

Oct 8, 2000

2,252

0

0

45

Buffalo, NY

www.angelfire.com

Jan 11, 2004

#20

• Jan 11, 2004

• #20

As far as flow goes. You can take about 10 brands of muffler and dyno them and you will only see about a 5 hp difference between them. So flow isn't really that different across the board.

Straight through mufflers will obviously flow better than a chambered muffler.

As for sound. I have heard pretty much all of the mufflers out there and for the my money nothing beats the sound of Bassani. The sound is not as harsh as some of the other mufflers out there. Its a deeper growl and much smoother sounding than anything else I have heard.