• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

Best way to clean your vert top!!!

  • Thread starter Thread starter ChrisYellowV6
  • Start date Start date Feb 17, 2004

ChrisYellowV6

New Member
Dec 25, 2003
362
0
0
Pensacola, FL
Feb 17, 2004
#1
  • Feb 17, 2004
  • #1
I have a yellow stang with a white top, and i've been trying to figure out for MONTHS how to clean the mildew off of it. I have talked to a guy at a top shop, other vert owners, finally I posted to a professional deatiling forum. They told me to get some stuff called "Amazing Roll Off" from a boat supply store. Wet the top down, spray it on, let it soak about 5 minutes, scrub with a nylon brush (like a bathtub cleaning brush) and then rinse it off very well, but you just have to make sure that you use LOTS of water to dilute it enough not to hurt your clearcoat. IT LOOKS BRAND NEW!!!!! I HIGHLY reccomend this to ANYBODY looking to clean their top!!!
 

Gault

Founding Member
Jul 13, 2002
173
0
0
Peyton, CO
Feb 17, 2004
#2
  • Feb 17, 2004
  • #2
I am glad they helped you out. I always feel like I may seen as a jerk suggesting to ask them and not provide an answer, but I have always been amazed at the tricks professional detailers have to clean things.

I used to think paying a detailer to clean your car was a joke until I saw what they put into a "real" detailing...

Thanks for letting us know the "trick".
 

marvinmycat

Founding Member
Feb 13, 2002
1,179
0
0
Buffalo, NY
Feb 21, 2004
#3
  • Feb 21, 2004
  • #3
Your top actually molds up?!?! Mine is black, and I've never had that problem. Are the different colored tops made from different materials?
 

98CobraClone

New Member
Feb 28, 2003
592
0
0
Ripley, Ohio
Feb 22, 2004
#4
  • Feb 22, 2004
  • #4
I have a tan top and along the rear section, by the windows, it actually gets a little dark.....like he explained, I guess it's mold....I've found things that will clean it off, but keeping it off is another matter. I don't have the time to constantly clean it the way it needs to be done.......plus I'm looking at getting a black top here pretty soon anyway
 

BigChiefSmokem

Founding Member
Feb 20, 2002
1,400
0
36
Jacksonville, FL
Jun 24, 2004
#5
  • Jun 24, 2004
  • #5
ChrisYellowV6 said:
I have a yellow stang with a white top, and i've been trying to figure out for MONTHS how to clean the mildew off of it. I have talked to a guy at a top shop, other vert owners, finally I posted to a professional deatiling forum. They told me to get some stuff called "Amazing Roll Off" from a boat supply store. Wet the top down, spray it on, let it soak about 5 minutes, scrub with a nylon brush (like a bathtub cleaning brush) and then rinse it off very well, but you just have to make sure that you use LOTS of water to dilute it enough not to hurt your clearcoat. IT LOOKS BRAND NEW!!!!! I HIGHLY reccomend this to ANYBODY looking to clean their top!!!
Click to expand...

Does this amazing roll off stuff work for tan tops as well as white? Will it discolor my tan top at all? I have a problem with mildew despite the fact that every 6 months i scrub my top and reprotect it with raggtopp.
 

ChrisYellowV6

New Member
Dec 25, 2003
362
0
0
Pensacola, FL
Jun 24, 2004
#6
  • Jun 24, 2004
  • #6
MarvinMyCat said:
Your top actually molds up?!?! Mine is black, and I've never had that problem. Are the different colored tops made from different materials?
Click to expand...

Mildew, not mold

And you can't see black mildew on a black top....and no they are all made from vinyl.

It says safe for all colors of vinyl, just dont let it touch your clearcoat at full strength, for cleaning paint and clearcoat dilute it 1:5 with water or something. I wont say it lasts 6 months...what do you have that lasts for 6 months? I want that!!!!
 

BigChiefSmokem

Founding Member
Feb 20, 2002
1,400
0
36
Jacksonville, FL
Jun 24, 2004
#7
  • Jun 24, 2004
  • #7
ChrisYellowV6 said:
Mildew, not mold

And you can't see black mildew on a black top....and no they are all made from vinyl.

It says safe for all colors of vinyl, just dont let it touch your clearcoat at full strength, for cleaning paint and clearcoat dilute it 1:5 with water or something. I wont say it lasts 6 months...what do you have that lasts for 6 months? I want that!!!!
Click to expand...

Well, i use raggtopp products and i'm real happy with them. I have a vinyl top, but have used the protectant they make for the cloth top and i actually prefer that better and have gone a year with the top still beading water with 3-4 coats of that protectant on there.

So, will this stuff take ALL of the mildew off and i'll be able to start fresh like a brand new top, apply my protectant and i'll be good to go?? how does this mildew stuff start and why is it so damned hard to get off?

Maybe i'm not letting the raggtopp cleaner soak in long enough.. I just read a website that said 10-20 minutes... the most i've left mine on is 10 probably.. maybe i should let it sit longer?
 

ChrisYellowV6

New Member
Dec 25, 2003
362
0
0
Pensacola, FL
Jun 25, 2004
#8
  • Jun 25, 2004
  • #8
you can try letting it sit longer. no i can not get every little bit of mildew off of my top...it was htere when i bought it and pisses me off. but the #1 cause of mildew i found out is the dew in the morning.

mildew grows where moisture sits. when it dies it turns black, and aheres to the surface. Thats why its so hard to get off. you can't see mildew while its living, which is also a little known fact. thats why when you clean your top you want to clean it all over.
 

BigChiefSmokem

Founding Member
Feb 20, 2002
1,400
0
36
Jacksonville, FL
Jun 25, 2004
#9
  • Jun 25, 2004
  • #9
ChrisYellowV6 said:
you can try letting it sit longer. no i can not get every little bit of mildew off of my top...it was htere when i bought it and pisses me off. but the #1 cause of mildew i found out is the dew in the morning.

mildew grows where moisture sits. when it dies it turns black, and aheres to the surface. Thats why its so hard to get off. you can't see mildew while its living, which is also a little known fact. thats why when you clean your top you want to clean it all over.
Click to expand...

good info, i didnt know that... How hard of a bristle brush do you use on the top?? maybe i should use something a bit harder? Stiffer bristles, i mean.
 

ChrisYellowV6

New Member
Dec 25, 2003
362
0
0
Pensacola, FL
Jun 25, 2004
#10
  • Jun 25, 2004
  • #10
i just use a bathroom tub brush thats nylon bristles i bought from walmart..it works fine.
 

BigChiefSmokem

Founding Member
Feb 20, 2002
1,400
0
36
Jacksonville, FL
Aug 12, 2004
#11
  • Aug 12, 2004
  • #11
One more question... Will this stuff completely clean the top as well, take off all the dirt and what not so i can immediately apply the protectant afterward?
 

ChrisYellowV6

New Member
Dec 25, 2003
362
0
0
Pensacola, FL
Aug 12, 2004
#12
  • Aug 12, 2004
  • #12
i used it, and it did not completely clean my top. there were still some mildew stains afterwards that were there when i purchased my top. that was it though. lemme know how it works .
 
You must log in or register to reply here.

Similar threads

What's In Your Detailing "kit"?
  • Adieu
  • Oct 27, 2015
  • Mustang Sound & Shine All
Replies
11
Views
5K
Mustang Sound & Shine All Jan 27, 2020
RaggedGT
Timing Cover/harmonic Balancer Removal And Replacement
  • jrichker
  • May 28, 2017
  • Fox 5.0 Mustang Tech
Replies
1
Views
16K
Fox 5.0 Mustang Tech Jul 6, 2024
Noobz347
Need Help, Car Wont Start, I've Gone Through Both Checklists
  • 93silverlx50
  • Jul 22, 2017
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
12K
Fox 5.0 Mustang Tech Apr 30, 2019
General karthief
For those of you in the snow belt, what's your winter beater? *PICS*
  • Shiroelex
  • Nov 7, 2010
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
42
Views
7K
1996 - 2004 SN95 Mustang -General/Talk- Nov 22, 2010
BLOWN347STROKER
Water Spot Removal + Undercoating Fender *Pics*
  • SRT Handz
  • Mar 12, 2010
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
18
Views
5K
1996 - 2004 SN95 Mustang -General/Talk- Mar 15, 2010
fiveoho
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?